The One Laser Engraver That Can Engrave Everything — My Hands-On Test of the ComMarker Omni 1 الأشعة فوق البنفسجية

If you’ve ever researched laser engravers, you’ve probably come across the same limitations again and again:

• ليزر ديود can’t engrave on glass or clear acrylic.
• ليزر الألياف can’t touch wood.
• ليزر CO₂ can’t engrave raw metal.

But what if I told you there’s another type of laser engraver—one that can engrave all of those materials, و اكثر? I’m talking about UV laser engraving.

اليوم, I’m sharing my full review and real-world test results using the كومماركر أومني 1, a UV laser engraver that, quite frankly, blew me away. If you’re looking for a versatile machine for your DIY workshop or laser engraving business, this review is for you.

---

Unboxing the ComMarker Omni 1: Setup in Minutes

Let’s start with the basics. الأومني 1 UV laser engraver came in three large parts:

1. ال base (pre-attached cables)
2. ال tower (vertical column)
3. ال laser module

Assembly was simple—just 8 screws total. Four to attach the tower to the base, and another four to mount the laser head. بعد ذلك, plug in the cables and you’re ready to go. No complicated setup, no confusing wiring.

بصدق, if you’ve ever struggled putting together a diode or CO₂ machine, this is refreshingly easy.

للنصيحة: It ships with two lenses—150mm and 75mm. I did most of my tests with the 150mm lens.

---

What Is a UV Laser Engraver (And Why It’s So Special)?

كومماركر أومني 1 هو أ حفارة ليزر للأشعة فوق البنفسجية, operating at 355nm with a 5W power rating. الآن, you might think 5 watts sounds weak—but don’t let that fool you.

Due to its short wavelength, the UV beam interacts differently with materials compared to CO₂ or diode lasers. It doesn’t rely on heat to burn or vaporize the surface. بدلاً من, هو - هي breaks molecular bonds, which makes it ممتاز for high-detail, low-damage engraving.

And the results? They speak for themselves.

---

1 – Engraving on Aluminum Business Cards

Let’s start small—literally. I engraved a portrait and a logo onto black-coated aluminum business cards.

• نتيجة: Razor-sharp lines, no smudging, incredibly small spot size.
• Detail Level: Think photorealistic at the size of a quarter.

This test alone showed me that the Omni 1 could handle the kind of precision normally reserved for machines triple the price.

---

2 – Engraving on Wood

الآن, you might assume UV lasers aren’t ideal for wood—but guess what? It engraved my sample wood blocks beautifully.

نصيحة: Settings matter. My first test ran too powerful and scorched the wood. Once I dialed in the تكرار, نبض Q, and line spacing, the engraving looked amazing.

No soot, no char, just a clean, crisp image of my daughter on birch.

---

3 – Ceramic Coasters

One of my favorite materials to engrave is ceramic, and the Omni 1 nailed this job.

• No masking tape
• No pre-treatment
• Just pure UV power directly onto the surface.

If you’re thinking of adding engraved coasters to your product line—wedding gifts, company swag—this machine can handle it with ease.

---

4 – Stainless Steel and Brass

Here’s where the ComMarker Omni 1 truly shined.

• الفولاذ المقاوم للصدأ: Produced a deep black mark that I’ve never been able to get from my fiber laser.
• Brass Coins: Dark, legible, and no distortion, even on small text.

This alone makes it a great نقاش الليزر للمعادن if you want high-contrast marking without a fiber laser.

---

5 – Engraving on Felt & Cutting Cleanly

الأومني 1 includes some felt samples, and engraving was perfect—clean, no burn-through on the backside.

But I also tested cutting felt, using a thin cross shape. The cut was sharp, مع zero char or melted edges. بصدق, it looked like I used a scalpel, not a laser.

---

6 – Wax Tin Labels

Normally I use printed labels for my wax tins—but this time I engraved directly onto the metal lid. No smudging, no irregularities. The UV beam handled the curved surface and coating like a champ.

This could be a total game-changer for product packaging.

---

7 – Clear Acrylic and Glass

Here’s the moment you’ve been waiting for.

Clear acrylic? Check.
زجاج? قطعاً.

No marking spray. No coating. Just place the object on the bed and go.

I tested:

• A flat glass panel with my logo
• A reused pickle jar
• A glass ornament (with gold paint fill)

All engraved beautifully. The only challenge was with round objects—without a rotary tool, getting the focus right is tricky. But with a rotary? You’re in business.

Business idea: Engraved ornaments, كؤوس النبيذ, wedding favors.

---

8 – Leather Patches

I engraved both brown and gray leather patches. The results were surprisingly consistent:

• No burn smell
• No cleanup needed
• Just clean, الخطوط المحددة

These are ready to press onto hats or bags—no extra steps required.

---

9 – Cutting 3mm Wood (نعم, قطع!)

Most people say UV lasers are for marking only. But I tried cutting 3mm birch plywood using the inlay pattern “Faith,” and…

It cut beautifully.

There was no charring on the edges, no burning smell, and the final piece popped out easily. For hobbyists or small crafts, this machine can absolutely double as a cutter on thin materials.

---

10 – FOOD ENGRAVING (نعم, بجد!)

I engraved:

• An apple
• An orange

النتائج? No burnt smell. No flavor change. Just clear, surface-level engraving.

While you’re probably not engraving fruit daily, imagine this: engraved cookies or macarons for weddings, أعياد الميلاد, or branded events. That’s a whole new revenue stream.

---

Who Is This Laser Engraver For?

إذا كنت تبحث عن laser engraver that can handle every material, المرحعي Omni 1 UV laser is a solid choice.

• Not just for hobbyists
• Great for small business owners
• Perfect for people unsure what niche to start in

$4,000 might sound high, but considering it replaces the need for multiple machines (الصمام الثنائي, الفيبر, co₂), it’s actually a good deal.

You could start engraving:

• Dog tags
• Ornaments
• Wood signs
• Glassware
• Coasters
• Leather patches
• التعبئة والتغليف
• Business gifts
• Even food

—without needing to buy a second laser.

---

Quick Specs: كومماركر أومني 1 الأشعة فوق البنفسجية

• نوع الليزر: الأشعة فوق البنفسجية, 355الطول الموجي نانومتر
• قوة: 5دبليو
• عدسة: 150مم (included), 75mm optional
• Supported Materials: معدن, بلاستيك, زجاج, السيراميك, خشب, جلد, أكريليك, طعام, و اكثر
• Spot Size: Extremely fine for high-resolution detail
• Focus System: Dual red dot alignment + motorized focus
• برنامج التحكم: LightBurn compatible
• نسيج & Rotary: Optional accessories available

---

Is the ComMarker Omni 1 the Best Laser Engraver in 2025?

If versatility is your top priority, this might be the best laser engraver for 2025—especially for beginners who want room to grow or pros looking to expand into new materials.

🔗 Check current pricing and bundles on ComMarker’s official store →