Wood is one of the most popular materials for laser engraving. From custom signs to personalized gifts, it’s versatile, natural, and always in demand. But there’s one common frustration: burn marks and charring.
If you’ve ever tried to engrave a wooden piece only to see dark edges or scorched surfaces, あなたは一人ではありません. The good news? 正しいアプローチで, you can achieve crisp, clean engravings on wood without burning.
このガイドでは, we’ll break down the best 設定, テクニック, and pro tips to help you master the art of wood engraving.
Why Does Wood Burn During Laser Engraving?
Before fixing the problem, it’s important to understand why it happens. Burning usually occurs because:
- Too much power: High wattage burns rather than engraves.
- Low speed: The laser spends too long on the same spot.
- Resin and oils: Some woods (松のように) naturally darken or burn more easily.
- Lack of airflow: Smoke and debris accumulate, scorching the surface.
Choosing the Right Wood for Engraving
Not all woods engrave the same way. Picking the right material makes a huge difference.
✅ Best woods for engraving: メープル, アルダー材, シラカバ, Cherry — light-colored, fine-grained woods.
⚠⚠️ Woods to avoid: Pine, Oak, and oily hardwoods — they burn or char more easily.
👉 ヒントの場合: Test a small sample piece first. Even within the same species, wood density can vary.
Laser Settings for Clean Wood Engraving
Dialing in your settings is key to avoiding burn marks.
- 力: Start low (10–30%) and increase gradually.
- スピード: Higher speeds (300–600 mm/s on diode, faster on CO₂) reduce scorching.
- 頻度 (if adjustable): Lower frequencies minimize heat buildup.
- パス: Use multiple light passes instead of one heavy pass.
👉 ヒントの場合: Every laser engraver behaves differently. Keep a log of test settings for each type of wood you use.
Techniques to Reduce Burning on Wood
1. Masking Tape Method
Cover the wood with painter’s tape or transfer tape before engraving. It absorbs excess heat and prevents smoke stains. 彫刻後, peel off the tape for a clean finish.
2. Use Air Assist
Air assist blows away smoke and debris while cooling the engraving area. This reduces charring and improves line sharpness.
3. Proper Focus
Ensure your laser is properly focused. A blurred beam creates wider burns and less precision.
4. Clean Your Optics
Dirty lenses and mirrors scatter the beam, causing overheating and burn marks. Regular cleaning is essential.
5. Sand and Finish
Light sanding after engraving removes minor scorch marks. Applying finishes like clear coat, beeswax, or mineral oil can enhance contrast without burning.
Advanced Pro Tips for Flawless Engraving
- Defocus Slightly: Move the focus a bit above the surface (0.5–1 mm). This spreads the heat and prevents overburn.
- Engrave in Multiple Layers: Shallow engravings layered gradually give better detail and less burn.
- Directional Engraving: Change the engraving angle (例えば, 45° instead of horizontal) to reduce heat lines.
- Pre-treat with Baking Soda Spray: Lightly spraying wood with a baking soda solution can help achieve cleaner marks (test first!).
Common Mistakes to Avoid
- Running your engraver at full power on wood.
- Using dark, oily, or resin-heavy woods.
- Skipping air assist.
- Engraving without testing on a scrap piece first.
コムマーカーオムニ 1 レーザー彫刻機
あらゆる素材を解き放つ次世代レーザー. ZeroBurn™ 彫刻テクノロジー 世界初の 16K HD レーザー彫刻機 10,000mm/s SpeedMax™ 彫刻システム UV レーザーですべての素材のロックを解除 ColdFront™ サーマルテクノロジー 電動リフティング 2 EZCADおよびLightBurn 360°回転彫刻システムと互換性のあるオプションのレンズ
結論
Learning how to engrave wood without burning comes down to the right combination of 材料, laser settings, そして彫刻技術. With masking tape, air assist, and multiple light passes, きれいにすることができます, professional results every time.
Whether you’re making signs, 装飾品, or personalized gifts, これら pro tips and tricks will help you engrave like a professional — no burn marks included.