Commarker Titan 100W Mopaは、深い金属作業に最適なレーザー彫刻家です?

Commarker Titan 100W Mopa Fiber Laser engraverを現実世界に見る

When ComMarker reached out and offered to let me test their Titan 100W MOPA fiber laser engraver, I was immediately intrigued. I’ve worked with a range of diode and fiber machines over the years, but the specs on this one hinted at something built for serious work—think obliterating metal, engraving 3D surfaces, and creating durable color markings. Spoiler alert: it didn’t disappoint.

Unboxing the Titan: What You Get

First impressions? The Titan comes in what I’d call full-on retail packaging—neat, 安全な, and organized. Here’s what I found in the box:

Certified laser safety goggles
Foot switch (thank you!)
Material test kit
All necessary screws and tools
Electric Z-axis gantry system
Cooling system
A solid 300×300 mm workspace
デュアルレンズ (110×110 and 200×200 optional)
Compatible with EZCAD & ライトバーン

Assembly was straightforward—rubber feet on the base, gantry bolted to the frame, data and power cables hooked up, and everything just worked.

推奨: If you’re new to fiber lasers but want industrial-grade results, the Titan is plug-and-play and feels intuitive. Check it out on the ComMarker official site.

主な特長: Power Meets Precision

の Titan 100W MOPA fiber laser engraver is designed for non-stop production. With up to 200W options available, I tested the 100W model which boasts:

Speeds up to 15,000 mm/s
Powered Z-lift for easy focus
Support for super 3D engraving and color marking
Dual-lens setup for variable work sizes
Excellent accuracy (HD-level detail)

The motorized Z-axis uses a dot alignment system, and when using the 110×110 lens, you’re looking at a focal length of around 279 んん. Switching to the 200×200 lens? Adjust to 426 んん.

Let’s Engrave: Deep Relief 3D Coin Test

This machine is no toy. I ran a 3D coin engraving as a real-world stress test.

Settings used:

スピード: 3200 mm/s
頻度: 80
マックスパワー: 90%
Q Pulse: 200
ライン間隔: 0.016
パス: 512
Cleanup every 5 パスする
Final cleanup pass: 6000 mm/s, 30% 力, 0.1 間隔

結果?
以上 2 hours of work and we were nearly through the coin—it was that deep. Details were crisp, textured, and tactile. This machine absolutely chews through metal. 正直に, I should’ve dialed back the power a bit!

Pro tip: Always test on scrap before committing to full power. View the full Titan 1 details here.

カラーマーキング: The Magic of MOPA

次は: ある color biohazard symbol テスト.

I used pink, 青, and “orchid” settings:

Speeds: 500–960 mm/s
頻度: 100–325
力: 11–33%
パルス幅 & line intervals varied by shade

What I learned: even tiny Z-height changes affect color dramatically. One small adjustment and the “orchid” turned blue. それで, when color matters, consistency is everything.

This laser engraver gives you stunning color flexibility—but expect a learning curve.

Plastic Engraving & Rust Removal

Tried engraving a white plastic MacBook charger next:

スピード: 2500 mm/s
頻度: 50
力: 20%
Clean, sharp lines and no burn smell (thanks to good ventilation)

Also cleaned up a rusty Stanley hammer using:

スピード: 3500 mm/s
頻度: 20
力: 80%
結果? Practically new. Surface rust vaporized with no grinding needed.

Whether you’re branding tools or cleaning them, the Titan gets the job done clean and fast.

Mistakes I Made (So You Don’t Have To)

Overpowering on coins: Burned right through and scorched my bed. Rookie move. Keep a ceramic tile or coaster underneath during deep work.
Improper ventilation layout: Placed the split unit too close to the engraving area. 結果? Metal particulates gunked up the intake.
Color inconsistencies: Z-height changes really impact color outcomes. Always test first.

Dog Tags = Easy Money

Laser-engraved dog tags are fast, fun, and profitable:

設定: 1500 mm/s, 75 頻度, 50% 力
Engraved and cleaned in under 2 分
QR code test = success

I could easily see someone starting a side hustle making tags for pets, sports teams, or events.

コムマーカータイタン 1 JPT Mopa ファイバーレーザー彫刻機

~~$5,999~~ $4,799 保存:$1,200

これまで以上に強くなりました. 最大200週間の超大国電気リフティングの頑丈なために設計されています 2 オプションのレンズカラーマーキング能力スーパー3D彫刻 & 切断能力15,000mm/s speedmax™engraving 8k hd精度EzcadとLightburnと互換性

力

効果力

パッケージ

クリア

カテゴリー: レーザー彫刻機

Is It Worth the Price?

The Titan 100W MOPA model I tested runs around $6,799. Compared to similar machines that cost $8,000+ and don’t even include a motorized Z, the value is clear.

長所: