When it comes to precision marking and engraving, ultraviolet (紫外線) and fiber lasers each offer unique strengths. コムマーカーの オムニ 1 UVレーザー彫刻機, B6 MOPA Fiber Laser Engraver, and the high-power タイタン 1 JPT MOPA ファイバーレーザー彫刻機 cover the full spectrum of engraving needs—from ultra-fine detail on delicate materials to heavy-duty metal cutting. This guide will help you decide between UV and fiber—and, if you need serious power, why Titan 1 might be your best bet.
1. UV対. ファイバーレーザー: Quick Technology Breakdown
| 特徴 | UVレーザー (オムニ 1) | ファイバーレーザー (タイタン 1 JPT MOPA) |
|---|---|---|
| 波長 | 355 nm (cold light) | 1064 nm (赤外線) |
| パワーオプション | 5 W / 10 w uv | 60 W / 100 W / 200 W |
| スポットサイズ & 解決 | ~0.01 mm spot, 16KHD | ~0.02 mm spot, 8K解像度 |
| Heat-Affected Zone (危険有害性) | Minimal—no burning or charring | Small but deeper cuts possible |
| 理想的な材料 | プラスチック, ガラス, セラミックス, コーティングされた金属, 木, レザー | 金属 (鋼鉄, アルミニウム, 真鍮), thicker plastics |
| 最適な用途 | Ultra-fine, burn-free detail | High-throughput metal engraving & 切断 |
2. コムマーカーオムニ 1 UVレーザー: Zero-Burn Precision
Why Choose UV?
The Omni 1’s 355 nm UV beam delivers cold-light marking, meaning virtually zero heat-affected zone—critical when you’re engraving:
- Clear acrylic without yellowing
- ガラス without cracks or spidering
- レザー without scorching
プラス, its 16K HD解像度 (0.001 MM精度) reproduces micro-circuit patterns and ultra-small text.
Sample Settings: Frosted Glass Coasters
- ソフトウェア: ライトバーン
- 力: 25%
- スピード: 300 mm/s
- 頻度: 40 kHz
- ライン間隔: 0.03 んん
- パス: 2
結果: Sharp, frosted engravings that stand up to dishwashing.
トラブルシューティングのヒント
- Faint Marks? Verify auto-focus is within ±0.2 mm of the surface.
- Uneven Frost? Slow speed (200 mm/s) and bump power to 30%.
- Lens Fogging? Add a small PC fan for localized airflow.
Ready for burn-free detail? → Buy Omni 1 UVレーザー彫刻機
3. コムマーカー タイタン 1 JPT MOPA Fiber Laser: Industrial-Scale Power
Why Titan 1?
Titan 1’s 200 W MOPA fiber laser is built for heavy manufacturing:
- Deep cutting: slice through up to 5 mm of stainless steel
- 3D刻印: multi-layer depth control (3D Slice mode)
- Color marking: vivid by tuning pulse width (10–400 ns)
- SpeedMax™: まで 15,000 mm/s for high throughput
Sample Settings: Stainless Steel Panel Logos
- ソフトウェア: ezcad2
- レーザー出力: 100% (200 W)
- スピード: 500 mm/s
- 頻度: 40 kHz
- Qパルス幅: 200 ns
- ライン間隔: 0.02 んん
- パス: 1
結果: 深い, permanent logos with high edge sharpness on 4 mm SS304.
トラブルシューティングのヒント
- Sheet Warping? Use air-assist at 20 PSI to cool edges.
- Inconsistent Depth? Run “Field Correction” in EZCad2 for bed alignment.
- Color Variations? Adjust pulse width in 10 ns increments for perfect contrast.
Need industrial horsepower? → Shop Titan 1 JPT MOPA Fiber Laser
4. Which Model Matches Your Workflow?
| Shop Type | Recommended Model | なぜそれが機能するのか |
|---|---|---|
| Custom Gifts & Crafts | オムニ 1 紫外線 | Burn-free on acrylic, ガラス, leather—perfect for personalized items. |
| ジュエリー & Medical Tools | オムニ 1 紫外線 / タイタン 1 | UV for micro-detail; タイタン 1 for deeper engraving on metals. |
| Heavy Fabrication | タイタン 1 | Best for thick-metal cutting, high-volume production. |
| Mixed-Material Shops | Dual-Station (紫外線 + タイタン 1) | Switch between UV finesse and fiber power seamlessly. |
5. メンテナンス & Best Practices
- Optics Care: Clean lenses/mirrors every 50 hours using lens-grade isopropyl alcohol.
- エアアシスト: For fiber on metal, 15–20 PSI reduces scorching and clears slag.
- Software Calibration: Quarterly “Field Correction” in EZCad2 or LightBurn ensures grid accuracy.
- Spare Parts Kit: Keep replacement lenses, 鏡, and a backup fiber module—optics degrade faster under heavy use.
6. Take Action
Whether you need zero-burn micro-precision また industrial-strength power, ComMarker has you covered:
Elevate your production, meet tight tolerances, and unlock new revenue streams with the world’s leading UV and fiber laser technologies.