The One Laser Engraver That Can Engrave Everything — My Hands-On Test of the ComMarker Omni 1 UV

If you’ve ever researched laser engravers, you’ve probably come across the same limitations again and again:

• Diode lasere can’t engrave on glass or clear acrylic.
• Fiberlasere can’t touch wood.
• CO₂ lasers can’t engrave raw metal.

But what if I told you there’s another type of laser engraver—one that can engrave all of those materials, og mer? I’m talking about UV laser engraving.

I dag, I’m sharing my full review and real-world test results using the ComMarker Omni 1, a UV laser engraver that, quite frankly, blew me away. If you’re looking for a versatile machine for your DIY workshop or laser engraving business, this review is for you.

---

Unboxing the ComMarker Omni 1: Setup in Minutes

Let’s start with the basics. Omni 1 UV laser engraver came in three large parts:

1. De base (pre-attached cables)
2. De tower (vertical column)
3. De laser module

Assembly was simple—just 8 screws total. Four to attach the tower to the base, and another four to mount the laser head. Etter det, plug in the cables and you’re ready to go. No complicated setup, no confusing wiring.

Ærlig talt, if you’ve ever struggled putting together a diode or CO₂ machine, this is refreshingly easy.

For tipset: It ships with two lenses—150mm and 75mm. I did most of my tests with the 150mm lens.

---

What Is a UV Laser Engraver (And Why It’s So Special)?

ComMarker Omni 1 er en UV lasergraver, operating at 355nm with a 5W power rating. Nå, you might think 5 watts sounds weak—but don’t let that fool you.

Due to its short wavelength, the UV beam interacts differently with materials compared to CO₂ or diode lasers. It doesn’t rely on heat to burn or vaporize the surface. I stedet, den breaks molecular bonds, which makes it perfekt for high-detail, low-damage engraving.

And the results? They speak for themselves.

---

1 – Engraving on Aluminum Business Cards

Let’s start small—literally. I engraved a portrait and a logo onto black-coated aluminum business cards.

• Resultat: Razor-sharp lines, no smudging, incredibly small spot size.
• Detail Level: Think photorealistic at the size of a quarter.

This test alone showed me that the Omni 1 could handle the kind of precision normally reserved for machines triple the price.

---

2 – Engraving on Wood

Nå, you might assume UV lasers aren’t ideal for wood—but guess what? It engraved my sample wood blocks beautifully.

Tupp: Settings matter. My first test ran too powerful and scorched the wood. Once I dialed in the Frekvens, Q-puls, and line spacing, the engraving looked amazing.

No soot, no char, just a clean, crisp image of my daughter on birch.

---

3 – Ceramic Coasters

One of my favorite materials to engrave is ceramic, and the Omni 1 nailed this job.

• No masking tape
• No pre-treatment
• Just pure UV power directly onto the surface.

If you’re thinking of adding engraved coasters to your product line—wedding gifts, company swag—this machine can handle it with ease.

---

4 – Stainless Steel and Brass

Here’s where the ComMarker Omni 1 truly shined.

• Rustfritt stål: Produced a deep black mark that I’ve never been able to get from my fiber laser.
• Brass Coins: Dark, leselig, and no distortion, even on small text.

This alone makes it a great Lasergraver for metall if you want high-contrast marking without a fiber laser.

---

5 – Engraving on Felt & Cutting Cleanly

Omni 1 includes some felt samples, and engraving was perfect—clean, no burn-through on the backside.

But I also tested cutting felt, using a thin cross shape. The cut was sharp, med zero char or melted edges. Ærlig talt, it looked like I used a scalpel, not a laser.

---

6 – Wax Tin Labels

Normally I use printed labels for my wax tins—but this time I engraved directly onto the metal lid. No smudging, no irregularities. The UV beam handled the curved surface and coating like a champ.

This could be a total game-changer for product packaging.

---

7 – Clear Acrylic and Glass

Here’s the moment you’ve been waiting for.

Clear acrylic? Sjekke.
Glass? Absolutt.

No marking spray. No coating. Just place the object on the bed and go.

I tested:

• A flat glass panel with my logo
• A reused pickle jar
• A glass ornament (with gold paint fill)

All engraved beautifully. The only challenge was with round objects—without a rotary tool, getting the focus right is tricky. But with a rotary? You’re in business.

Business idea: Engraved ornaments, vinglass, Bryllup favoriserer.

---

8 – Leather Patches

I engraved both brown and gray leather patches. The results were surprisingly consistent:

• No burn smell
• No cleanup needed
• Just clean, defined lines

These are ready to press onto hats or bags—no extra steps required.

---

9 – Cutting 3mm Wood (Ja, Kutting!)

Most people say UV lasers are for marking only. But I tried cutting 3mm birch plywood using the inlay pattern “Faith,” and…

It cut beautifully.

There was no charring on the edges, no burning smell, and the final piece popped out easily. For hobbyists or small crafts, this machine can absolutely double as a cutter on thin materials.

---

10 – FOOD ENGRAVING (Ja, Seriøst!)

I engraved:

• An apple
• An orange

Resultatet? No burnt smell. No flavor change. Just clear, Gravering på overflatenivå.

While you’re probably not engraving fruit daily, imagine this: engraved cookies or macarons for weddings, bursdager, or branded events. That’s a whole new revenue stream.

---

Who Is This Laser Engraver For?

Hvis du leter etter en laser engraver that can handle every material, the ComMarker Omni 1 UV laser is a solid choice.

• Not just for hobbyists
• Great for small business owners
• Perfect for people unsure what niche to start in

$4,000 might sound high, but considering it replaces the need for multiple machines (diode, fiber, Co₂), it’s actually a good deal.

You could start engraving:

• Hundemerker
• Ornaments
• Wood signs
• Glassvarer
• Coasters
• Leather patches
• Emballasje
• Business gifts
• Even food

—without needing to buy a second laser.

---

Quick Specs: ComMarker Omni 1 UV

• Laser type: UV, 355nm wavelength
• Makt: 5W
• Linse: 150mm (included), 75mm optional
• Supported Materials: Metall, plast, glass, keramikk, tre, lær, akryl, mat, og mer
• Spotstørrelse: Extremely fine for high-resolution detail
• Focus System: Dual red dot alignment + motorized focus
• Kontrollprogramvare: LightBurn compatible
• Innhegning & Rotary: Optional accessories available

---

Is the ComMarker Omni 1 the Best Laser Engraver in 2025?

If versatility is your top priority, this might be the best laser engraver for 2025—especially for beginners who want room to grow or pros looking to expand into new materials.

🔗 Check current pricing and bundles on ComMarker’s official store →