Introduksjon:

We found that many of our friends urge us to try something interesting. So we are here to give you some inspiration for different kinds of lasergravere‘ uses.

Today we bring the method of 2.5D laser engraving, and we hope you may like it. If you are also into 2.5D laser engraving, keep reading this article.

Actually, the picture for 2.5D laser engraving needs to be converted from STL, but some of the black and white are already converted and can be used directly in Lightburn.

Grunnleggende informasjon:

Programvare	Lightburn
Maskin	ComMarker B4 JPT MOPA fiberlaser Markeringsmaskin
Lasermodul utgangseffekt	30W
Materiale brukt	Skifer
Material info	5mm slate
Å lage tid(min)	1 time

Innstilling:

Prosessmetode	Fylling
Prosessmateriale	Skifer
Hastighet(mm/s)	400
Maks kraft(%)	100
Modus	3D Sliced
Intervall	0.04
Punktbredde	0.04

Undervisning:

Step1

Test the material you want to laser engrave for the suitable parameter to achieve the effect you want.

Step2

Input the picture.

Step3

Set the parameter.

Step4

Hold tålmodighet, and your work will be finished within a few hours.

Designfiler:

Download