1. Install the driver
   Merk: please conduct the following operation before installing the driver
   1) The machine is on; 2)Keep the emergency button not pressed; 3) Data cable connected1.Right-click “this PC”, click “Manage”
2. Click “Device Manager”, find “USBLMCV2”, “USBLMCV4”or“Unknown Device” in “Other devices” or “Universal SerialBus devices”
3. Right-click “USBLMCV2”, “USBLMCV4” or “Unknown.Device” and “Update driver”
4. Velge “Browse My Computer for Drivers” 1234
5. Find the corresponding file with window system in the USB drive, click OK
6. Click “Install”
7. Click “finish” if it is successful
8. It will display “BJJCZ Device” in Device Manager

Noted: *It is recommended to copy and paste the files of the USB disk to the computer desktop or other computerdisks.

How to use EZCAD programvare with Fiber Laser Engraver?

Steg 1: Open EZCAD Software

• Connect the USB to your computer.
• Navigate to “EZCAD for ComMarker” in the USB folder.
• Select the 110mm folder if your lens is 110mm.
• Open the software “EZCAD2“.

Steg 2: Add Text or Import Files

• You can enter “tekst”, or import “pictures” eller “vector files” as needed.
• It is recommended to select the text for initial testing.

Steg 3: Import the Correction File

• Velge “Parameter (F3)”.
• Tick “Use Correct File”.
• Select the .cor file from the USB flash drive or computer disk.
• Click “OK (确认)”.

Steg 4: Juster fokus

• Press the up or down button to lift or lower the laser head until the three red light points overlap, indicating the best focal point.
• Målingsbrennvidden til denne maskinen er ___________ mm (110×110) og _________ mm (200×200).
• The measuring distance is the length from the bottom line of the laser head to the surface of the engraving material.
• Fokusskalibreringstrinn:
  1. Place the stainless steel test plate on the machine table.
  2. Lift or lower the laser head to the best focus point according to the handwritten number.
  3. Turn on the machine and connect it to the computer.
  4. Importer "tekst" for testing, Velg standardparametere, and tick “continuous part”.
  5. Trykk “Rød (F1)”For å sikre at det markerer på testmaterialet. Click “mark” for continuous marking.
  6. Juster laserhodet for å observere endringer i laserintensitet. Stop at the strongest laser intensity.
  7. Loosen the screws for the auxiliary red light beams.
  8. Adjust the red light dots to overlap and tighten the screws.

Steg 5: Markeringstest

• Place the test engraving material on the machine.
• Click “rød (F1)” to outline the marking area with the red light.
• Tick “Default Parameters”.
• Click “Merke (F2)” to start marking.

Å følge disse trinnene sikrer at commarker -maskinen din er satt opp riktig med EZCAD -programvare for optimal performance.

FAQ for EZCAD -programvare:

1.Er Lightburn bedre enn Ezcad?

Lightburn er designet for å være brukervennlig og tilgjengelig for brukere av alle ferdighetsnivåer. Selv om det gir et godt nivå av tilpassbarhet, Det har kanskje ikke så mange avanserte alternativer som EZCAD.

2.Hvordan gjør det Fiberlasergravering Programvarearbeid?

Med riktig fiberlasermerkingsprogramvare, Brukere kan lage design, Konfigurer dem til å kommunisere med maskinene sine, and apply the appropriate Fiber laser power settings.Fiber Laser engraving software operates as an essential intermediary between the user’s imagination and their engraving machines.

3.Hva er den beste fiberlasergraveringsfilen?

De beste filformatene for lasergravering er vektorfiler som for eksempel:

1. SVG (Skalerbar vektorgrafikk): Ideal for maintaining high quality at any size.
2. AI (Adobe Illustrator): Commonly used by professionals for detailed and scalable designs.
3. DXF (Tegning av utvekslingsformat): Widely supported in CAD and laser cutting software.

Disse formatene sikrer presis og ren gravering, Når de bruker matematiske formler for å lage former og linjer, noe som gjør dem svært skalerbare uten tap av kvalitet. For bilder, high-resolution PNGs or BMPs are preferred for engraving detailed pictures.