Acest ghid va aprofunda aspectele tehnice ale gravoarelor cu laser, acoperind tipurile de lasere disponibile, capacitățile lor, și considerentele esențiale pentru selectarea mașinii potrivite. În plus, vom discuta factorii cheie la care trebuie să fii atent, ensuring you avoid potential pitfalls.

Tipuri de mașini de gravat cu laser

Principalele tipuri de mașini de gravat cu laser sunt lasere cu CO2, lasere cu fibră, și lasere UV. Fiecare are punctele sale forte, and your choice should align with your specific needs.

Lasere cu CO2

• Precizie: Moderat
• Gama de putere: 30W la 40W+
• Manipularea materialelor: Laserele CO2 excelează în gravarea materialelor organice precum lemnul, Piele, țesătură, acril, sticlă, și unele metale acoperite. They are ideal for thicker and softer materials.
• Cel mai bun pentru: Producători care lucrează cu o gamă largă de materiale nemetalice, from crafters to signage businesses.

Lasere cu fibra

• Precizie: Ridicat
• Gama de putere: 20W la 100W+
• Manipularea materialelor: Proiectat în principal pentru metale precum oțelul inoxidabil, aluminiu, alamă, si alte aliaje. Fiber lasers also perform well on certain plastics.
• Cel mai bun pentru: Cei care au nevoie să graveze metale cu mare precizie, precum bijutierii, producatorii de scule, and electronics brands.

Lasere UV

• Precizie: Ultra-înalt
• Gama de putere: 3W la 5W
• Manipularea materialelor: Ideal pentru marcarea materialelor delicate și sensibile la căldură, cum ar fi sticla, ceramică, materiale plastice, și chiar textile. Laserele UV minimizează daunele termice din cauza lor “rece” engraving process.
• Cel mai bun pentru: Companiile care lucrează cu materiale sensibile sau care au nevoie de amendă, detailed engraving without damaging the base material.

Considerații cheie pentru alegere a Mașină de gravat cu laser

1. Precizie de gravură

Precizia este crucială dacă munca dvs. necesită detalii fine, cum ar fi crearea de fonturi mici, desene complicate, sau grafică de înaltă rezoluție. The level of precision often correlates with the laser’s wavelength and control over the laser beam.

• Lasere cu CO2: Asigurați o precizie adecvată pentru modele mai mari, but struggle with fine details on harder materials.
• Lasere cu fibra: Oferă precizie ridicată, în special pentru metale și materiale plastice, making them ideal for detailed work.
• Lasere UV: Străluciți prin livrarea gravării ultra-precise, perfect for micro-engraving tasks where heat deformation must be avoided.

2. Putere laser

Puterea influențează direct cât de adânc poate tăia gravorul și cât de eficient poate manipula materiale mai groase. Higher power means faster and deeper engraving but may reduce precision in some materials.

• Lasere cu CO2: Disponibil într-o gamă largă de niveluri de putere (30W-40W+), they handle cutting and engraving on thicker non-metals but may struggle with metals unless coated.
• Lasere cu fibra: De obicei variază de la 20W la 100W, pot grava și chiar tăia metale subțiri. Puterea mai mică este potrivită pentru marcare, while higher wattage allows for cutting thicker metals.
• Lasere UV: Cu game de putere mai mici (3W-5W), UV lasers are best for marking delicate materials rather than cutting through them.

3. Compatibilitatea materialelor

Înțelegerea compatibilității materialelor fiecărui tip de laser este esențială. Different lasers excel with different types of materials.

• Lasere cu CO2: Excelent pentru gravarea și tăierea materialelor organice precum lemnul, Piele, acril, si sticla. in orice caz, bare metals are off-limits without coatings.
• Lasere cu fibra: Cel mai bun pentru metale și anumite materiale plastice, but struggles with wood or transparent materials like glass.
• Lasere UV: Manipulați materiale sensibile la căldură, cum ar fi plasticul, sticlă, și ceramică cu ușurință, offering precise markings without burning or cracking.

4. Grosimea materialului

Dacă intenționați să tăiați materiale, the thickness they can handle is a crucial consideration.

• Lasere cu CO2: Puterile mai mari pot tăia materiale mai groase, cum ar fi lemnul, Piele, și acrilic, making them versatile for hobbyists and professionals alike.
• Lasere cu fibra: Laserele cu fibră de mare putere pot tăia prin metale subțiri (pana la 2-3 mm). They’re great for applications that require clean cuts on metal.
• Lasere UV: Axat în primul rând pe marcare, mai degrabă decât pe tăiere. They aren’t suited for cutting thick materials but excel at high-quality engraving.

5. Considerații bugetare

Prețul mașinilor de gravat cu laser variază semnificativ în funcție de tip, putere, și caracteristici. Laserele cu CO2 tind să fie mai accesibile, whereas fiber and UV lasers come with a higher price tag due to their advanced capabilities.

• Lasere cu CO2: De obicei, mai accesibil, făcându-le un bun punct de intrare pentru întreprinderile mici și pasionați. Preturile variaza de la $500 la $10,000, depending on the power and size.
• Lasere cu fibra: Mai scumpe datorită preciziei mai mari și capacităților de gravare pe metal. Asteptati preturi incepand de la $2,000 up to $30,000+.
• Lasere UV: Cel mai scump, având în vedere precizia și capacitatea lor de a lucra cu materiale sensibile. Prețurile încep de obicei de la $5,000 si poate depasi $40,000 for more advanced models.

B4 20W JPT MOPA Fiber Laser Mașină de gravat

$3,732 $2,799 Salvați:$933

Portabil & Accesibil: B4 MOPA 20W Fibră Laser Gravurat Mașină, cu o greutate de 18 kg cu dimensiuni compacte. Ridicare electrică: Motor încorporat pentru focalizare precisă. Gravura versatilă: Culori pe oțel inoxidabil, alb-negru pe aluminiu, plus gravare 3D și adâncă pe metal și rocă. Zona de lucru spatioasa: Lentile duble (110mm, 200mm) cu calibrare precisă a punctului roșu. Îmbunătățit…

Rotativ Cant

0 rotativ

D69 Rotativ

D80 Rotativ

Rotativ Rotativ

Alege o opțiune0 rotativD69 RotativD80 RotativRotativ Rotativ

Putere

110V

220V

Alege o opțiune110V220V

clar

B4 20W JPT MOPA Fiber Laser Mașină de gravat cantitate

Adaugă in coş

Categorie: Gravoare cu laser cu fibre, Seria B, Gravoare laser cu fibre B4 Mopa, Gravoare cu laser

Considerații de siguranță

1. Ochelari de protecție cu laser: Utilizați întotdeauna ochelari de protecție corespunzători tipului de laser pe care îl utilizați, fie că este CO2, fibră, sau UV. Diferite lasere emit lumină la diferite lungimi de undă, so make sure your goggles are rated for the specific type of laser.
2. Sisteme de ventilație și evacuare: Gravarea anumitor materiale, în special materiale plastice și metale, poate produce vapori nocivi. Ensure your workspace is equipped with proper ventilation or an exhaust system to protect against toxic exposure.
3. Carcase pentru mașini: Dacă gravorul dumneavoastră cu laser nu vine cu o zonă de lucru închisă, luați în considerare achiziționarea sau construirea unuia. Enclosures prevent stray laser reflections from escaping and damaging your eyes or skin.
4. Manipularea materialelor: Fiți conștienți de faptul că unele materiale, precum PVC, produce fum toxici atunci când este gravat. Always research the materials you plan to work with to ensure safety.

Sfaturi pentru Geeks: Maximizarea potențialului gravorului dvs. cu laser

• Reglați fin setările laserului: Cele mai bune rezultate de gravare provin din experimentarea cu diferite setări, precum puterea, viteză, și durata pulsului. Acest lucru este deosebit de important pentru laserele cu fibre și UV, where precision is key.
• Testarea materialelor: Înainte de a începe proiecte mari, efectuați teste pe bucăți de resturi de material. Materiale diferite vor reacționa diferit la aceleași setări, so dialing in the perfect setup is essential.
• Stăpânirea software-ului: Software-ul folosit pentru controlul laserului este la fel de important ca și hardware-ul. Programe precum LightBurn sau RDWorks pentru lasere CO2, EZCAD pentru fibră, and specialized UV software offer different capabilities for optimizing your engraving process.
• întreținere: Păstrați-vă lentilele și oglinzile curate, și verificați regulat alinierea laserului pentru a menține performanța optimă. Praf, resturi, and misalignments can affect precision and power output.

Alegerea mașinii de gravat laser potrivită înseamnă echilibrarea preciziei, putere, compatibilitatea materialului, si buget. Indiferent dacă creați modele complicate pe metal, gravură în lemn, sau marcarea sticlei delicate, înțelegerea capacităților CO2, fibră, iar laserele UV vă vor ajuta să alegeți cel mai bun instrument pentru muncă. Remember to prioritize safety and maximize your machine’s potential with careful settings and testing.

Personalize Your School Supplies with ComMarker B4

Engrave Your Stationery

From notebooks and pencil cases to rulers and erasers, our ComMarker B4 series allows you to add a personal touch to all your stationery items using advanced gravare cu laser tehnologie. Imagine having your name, citate preferate, or unique designs engraved on your supplies, making them truly yours. The precision and accuracy of our gravatoare laser cu fibra ensure that every detail is captured perfectly through laser engraving.

Customize Your Trendy Tumblers and Thermoses

Stay hydrated in style with customized tumblers and thermoses. Noastre ComMarker B4 machines can engrave intricate designs on various types of tumblers and thermoses, including metal and plastic. Whether you want to add your name, school logo, or a motivational message, our laser engravers can create stunning results that will make your tumblers and thermoses stand out.

Unique Designs on Backpacks and Bags

Make your backpack or bag uniquely yours with the help of ComMarker’s laser engraving. Our powerful fiber laser engravers can handle a range of materials, allowing you to engrave leather, țesătură, și altele. Personalize your bag with your initials, favorite patterns, or custom artwork to make a statement wherever you go.

Stylish Lunch Boxes and Containers

Transform your lunch boxes and containers into stylish and personalized items with our ComMarker B4 series. Using gravare cu laser, you can engrave names, fun designs, or special messages to make lunchtime more enjoyable. Our machines can handle various materials, ensuring that your designs are durable and long-lasting.

Decorative Keychains and Accessories

Create custom keychains and accessories that add a personal touch to your school gear. Noastre ComMarker B4 engravers can etch intricate details onto metal, plastic, and other materials using laser engraving, making it easy to design unique pieces that reflect your style.

Why Choose ComMarker B4 Series for Your Back-to-School Engraving Needs?

Perfect for Beginners and Hobbyists

• Ridicare electrică: Ensures spot-on focusing with a concealed lifting motor, designed for beginners.
• Compatibilitate largă: Works with software like LightBurn & EZCAD2 for customizable and user-friendly laser engraving.
• Super capacitate de tăiere: Laser power cuts metals with 0.01 Precizie MM, rendering intricate images perfectly through laser engraving.
• Mașină de calitate industrială: High-speed engraving with advanced Galvo technology.
• Portabil & Accesibil: Weighs only 11kg with a handheld function, suitable for various materials.

Gravoare laser cu fibră ComMarker B4 20W

Evaluat 5.00 din 5 bazat pe 11 evaluările clienților

(11 recenzii ale clienților)

$1,999 $1,499 Salvați:$500

Ridicare electrică: ComMarker B4-20W dispune de un sistem avansat, motor de ridicare ascuns. 3D embosare și gravură adâncă: B4-20W mașină de gravat cu laser mânerele complicate, gravare 3D pe mai multe niveluri și gravare profundă pe metal și rocă. Zona de lucru spatioasa: 110lentile duble mm și 200 mm, zona de marcare cu locatoare duble cu puncte roșii pentru calibrare și focalizare precisă. Compatibilitate largă: Grava…

Rotativ Cant

0 rotativ

D69*1 Rotativ

D69+D80 Rotativ

D80 Rotativ

Alege o opțiune0 rotativD69*1 RotativD69+D80 RotativD80 Rotativ

Putere

110V

220V

Alege o opțiune110V220V

clar

Gravoare laser cu fibră ComMarker B4 20W cantitate

Adaugă in coş

Categorie: Gravoare cu laser, Seria B, Gravoare laser cu fibre B4, Gravoare cu laser cu fibre

Get Ready for Back-to-School with ComMarker

This back-to-school season, make your supplies stand out with the help of ComMarker. Noastre B4 series fiber laser engravers provide the precision, versatilitate, and ease of use needed to create personalized items that reflect your unique style. Explore our range of machines and discover how easy it is to elevate your school essentials through laser engraving.

Visit our website to learn more about the ComMarker B4 series and get started on your personalized laser engraving journey today. Make this school year unforgettable with custom engraved supplies that are as unique as you are!

Înțelegerea nevoilor dvs

Înainte de a te scufunda în anumite modele, este esențial să înțelegeți de ce aveți nevoie de la un gravor laser. Iată câteva considerații comune:

• Utilizare primară: Gravezi în principal lemn, metal, sau ambele?
• Buget: Cât ești dispus să cheltuiești?
• Spaţiu: Cât spațiu ai pentru mașină?
• Planuri de viitor: Intenționați să vă extindeți operațiunile într-o afacere mică?

Tipuri de Mașini de gravat cu laser

Lasere cu diode

Laserele cu diodă sunt accesibile și excelente pentru începători. Pot grava lemn și metale acoperite, making them ideal for hobbyists.

Avantaje:

• Cost-Eficient: Suitable for those with a limited budget.
• Dimensiune compactă: Takes up less space compared to CO2 lasers.
• Ușurință în utilizare: Simplu de operat, making them perfect for learning the basics.

Limitări:

• Restricții materiale: Cannot engrave bare metals.
• Viteză mai mică: Less efficient for high-volume work.

Lasere cu CO2

lasere cu CO2 sunt versatile și puternice, potrivit pentru gravarea unei game largi de materiale, inclusiv lemnul, acril, Piele, and some coated metals.

Avantaje:

• Versatilitate: Can handle a variety of materials.
• Putere superioară: More efficient for cutting and deep engraving.
• Caracteristici avansate: Often come with features like autofocus and large work areas.

Limitări:

• Cost mai mare: More expensive than diode lasers.
• întreținere: Requires regular alignment and cleaning.

Lasere cu fibra

Laser cu fibră sunt alegerea ideală pentru gravarea metalelor, oferind precizie si viteza. Sunt ideale pentru aplicații industriale și companii care doresc să graveze metale precum oțelul inoxidabil, aluminiu, and brass.

Avantaje:

• Precizie ridicata: Excellent for detailed metal engraving.
• Întreținere redusă: Requires minimal adjustments.
• Operare rapidă: Suitable for high-volume production.

Limitări:

• Cost: Generally more expensive than diode and CO2 lasers.
• Utilizare specifică: În primul rând pentru metale, not suitable for wood or acrylic.

De ce să alegeți ComMarker?

ComMarker oferă o gamă de gravatoare cu laser care răspund nevoilor și bugetelor diferite. Iată câteva motive pentru a lua în considerare o mașină ComMarker:

• Tehnologie avansată: Mașinile ComMarker sunt echipate cu cea mai recentă tehnologie laser, ensuring precise and high-quality engravings.
• Software ușor de utilizat: Our intuitive software makes it easy for beginners to get started and for experienced users to maximize their productivity.
• Asistență excelentă pentru clienți: ComMarker oferă asistență completă pentru clienți, ensuring you get the help you need when you need it.
• Modele versatile: Fie că cauți o diodă, CO2, sau laser cu fibră, ComMarker has a machine that fits your requirements.

Recomandări

Pe baza nevoilor dvs, iata cateva recomandari:

ComMarker B4-60W Caracteristici

• Ridicare electrică: ComMarker B4-60W este echipat cu un motor de ridicare ascuns pentru a asigura focalizarea la fața locului, permițând utilizatorilor să funcționeze fără probleme și îmbunătățind semnificativ rezultatul final al marcajului. Particularly designed for beginners to use easily.
• Compatibilitate largă: Vă permite să gravați orice model utilizând software diferit, inclusiv LightBurn & EZCAD2. It provides a wide range of customizable features and user-friendly controls to streamline your workflow and maximize productivity.
• Super capacitate de tăiere: Mașina noastră de gravare cu laser cu fibră funcționează cu o putere laser de 60W, tăierea metalelor până la 2 mm cu o precizie de 0.01 mm to render intricate images perfectly.
• Mașină cu laser de calitate industrială: Viteza extrem de mare de gravare este atinsă de tehnologia avansată Galvo și placa de bază industrială. Sistemul galvanometric de mare viteză vă oferă o stabilitate extremă pentru scanare rapidă, gravare, and turnaround.
• Două lentile de câmp: B4-60W echipează ambele obiective de câmp de 110 mm și 200 mm concepute pentru diferite scenarii, providing you with a perfect user experience.
• Portabil & Accesibil: Spre deosebire de voluminos, gravoare industriale tradiționale din fibre, cel B4-60W are doar 23,5 kg. Mașina are, de asemenea, un port de conectare a axei rotative, permițându-vă să gravați inele, bratari, sau alte suprafețe curbate ori de câte ori este nevoie, și vă permite să creați o gamă vibrantă de modele pe diverse materiale, inclusiv metalele, plastic, piatră, și altele!

Caracteristici ComMarker B4-20W

• Ridicare electrică: ComMarker B4-20W este echipat cu un motor de ridicare ascuns pentru a asigura o focalizare directă, permițând utilizatorilor să funcționeze fără probleme și îmbunătățind semnificativ rezultatul final al marcajului. Particularly designed for beginners to use easily.
• Compatibilitate largă: Vă permite să gravați orice model utilizând software diferit, inclusiv LightBurn & EZCAD2. It provides a wide range of customizable features and user-friendly controls to streamline your workflow and maximize productivity.
• Super capacitate de tăiere: Mașina noastră de gravare cu laser cu fibră funcționează cu o putere reală a laserului cu fibră de 20 W, tăierea metalelor până la 0.3 mm cu o precizie de 0.01 mm to render intricate images perfectly.
• Mașină cu laser de calitate industrială: Viteza extrem de mare de gravare este atinsă de tehnologia avansată Galvo și placa de bază industrială. Sistemul galvanometric de mare viteză vă oferă o stabilitate extremă pentru scanare rapidă, gravare, and turnaround.
• Două lentile de câmp: B4-20W echipează ambele obiective de câmp de 110 mm și 200 mm concepute pentru diverse scenarii, providing you with a perfect user experience.
• Portabil & Accesibil: Spre deosebire de voluminos, gravoare industriale tradiționale din fibre, B4-20W are doar 11 kg cu funcție de mână. Mașina are, de asemenea, un port de conectare a axei rotative, permițându-vă să gravați inele, bratari, sau alte suprafețe curbate ori de câte ori este nevoie, și vă permite să creați o gamă vibrantă de modele pe diverse materiale, inclusiv metalele, plastic, piatră, și altele!

Noțiuni de bază

Când începeți cu gravarea laser, este esențial să vă familiarizați cu software-ul și protocoalele de siguranță. Aparatele ComMarker vin cu ghiduri și tutoriale cuprinzătoare to help you get started quickly and safely.

Concluzie

Alegerea mașinii de gravat laser potrivite depinde de nevoile dumneavoastră specifice, buget, și planuri de viitor. ComMarker oferă o gamă de produse de înaltă calitate, aparate ușor de utilizat, care se adresează atât începătorilor, cât și profesioniștilor. Indiferent dacă doriți să începeți un nou hobby sau să vă extindeți afacerea, ComMarker has the perfect solution for you.

Gata să faci următorul pas? Explore our range of laser engravers at ComMarker and find the perfect machine to bring your creative ideas to life.

O placă de circuit imprimat (PCB) is a foundational component in electronic devices, providing mechanical support and electrical connections for electronic components. PCBs are made by etching conductive pathways, copper foil, and other elements onto a non-conductive substrate, allowing electronic components to communicate and function together. PCB Assembly (PCBA) involves soldering these components onto the PCB. Separating PCBs and PCBAs is a critical step in the manufacturing process, ensuring the quality and reliability of the final product.

2. Traditional PCB Depaneling Methods

Manual PCB Depaneling

Manual depaneling is typically used for circuit boards that can withstand high levels of stress, typically those without Surface Mount Devices (SMDs). Workers manually separate the PCBA boards along V-grooves using appropriate fixtures. This method relies on manual labor, which can lead to inconsistencies and potential damage to the boards.

Saw Blade Machine Depaneling

Saw blade depaneling can be used for PCBA boards, whether or not they have V-grooves. This method is limited to straight cuts and generates some dust and mechanical stress, which can affect the board’s integrity. It is not suitable for cutting multiple materials simultaneously.

V-Cut Machine Depaneling

The V-cut machine uses a round knife or a V-shaped blade to separate PCBA boards along V-grooves. This process can be performed manually, electrically, or pneumatically. It is commonly used for boards that have been pre-scored, making it easier to break them apart.

Punch Machine Depaneling

Punch depaneling requires a special punching die. The PCBA is placed in the correct position within the mold, and the punch machine cuts the board into smaller pieces. This method is efficient but requires custom tooling, which can be costly and time-consuming to set up.

Milling Cutting Machine Depaneling

The milling cutting machine uses a high-speed rotating milling cutter to separate a multi-piece rigid PCBA board according to a pre-programmed path. This method overcomes the limitations of straight-line cuts associated with saw blades or V-cut procedures, allowing for more complex shapes.

3. The Key Advantages of Laser Depaneling

Precision and Cleanliness

Laser depaneling is a non-contact process that eliminates the mechanical stress associated with traditional methods. This precision reduces the risk of damaging components and maintains the integrity of the board. În plus, laser cutting produces minimal dust and debris, making it a cleaner process.

Versatilitate

Lasers can cut a wide range of materials, including rigid, flexible, and rigid-flex PCBs. This versatility makes laser depaneling suitable for various applications, including intricate designs and small components that traditional methods may not handle effectively.

Efficiency and Automation

Laser depaneling can be easily automated and integrated into production lines, enhancing efficiency. Software controls and user-friendly interfaces enable quick programming of cutting patterns and precise alignment, reducing setup time and increasing throughput.

Minimal Thermal Impact

lasere UV, cu o lungime de undă de 355 nm, operate using a “Marcaj rece” method that minimizes thermal impact. This ensures that there is no significant heat damage to the components adjacent to the cutting area, preserving the board’s quality and functionality.

4. Applications of PCB Laser Technology

PCB Laser Marking

Laser marking is used to inscribe various characters, simboluri, and patterns on PCBs. This method supports anti-counterfeiting measures by creating fine, detailed marks that are difficult to replicate. Laser marking is also used for serial numbers and QR codes, facilitating complete traceability and quality control in the production process.

PCB Laser Decoating

Laser decoating is used to remove protective coatings from PCB surfaces, especially when replacing defective components. This method is more efficient and environmentally friendly than traditional manual grinding or scraping, providing a higher yield of usable PCB boards.

Tin Ball Laser Soldering

Laser soldering using tin balls is a precise, non-contact process ideal for sensitive components and areas requiring careful temperature control. This method offers high precision, minimizing the risk of electrostatic discharge and other issues associated with traditional soldering methods.

Recommendation: ComMarker B4

For those looking to leverage the benefits of laser depaneling, cel ComMarker B4 Gravura laser cu fibra este o alegere excelenta. This advanced machine offers high precision, Impact termic minim, and versatility in material compatibility. It’s particularly well-suited for applications requiring intricate cutting and marking, such as high-quality PCB manufacturing. The ComMarker B4 is user-friendly, eficient, and cost-effective, making it an ideal addition to any PCB production line seeking to improve quality and efficiency.

The 20W ComMarker B4 boasts the smallest size and most powerful output across all industrial-grade fiber laser engravers. It delivers deeper etches faster and with finer detail on all metals, as well as on plastic, Piele, și altele. The ComMarker B4 is handheld with automatic lifting for easy use and comes with many useful features and accessories for batch engraving.

Fie că ești un hobbyist, artist, sau proprietarul unei mici întreprinderi de producție, the ComMarker B4 is the ideal tool to scale your business.

Key Features of the ComMarker B4

Precizie și viteză

• High Resolution: The ComMarker B4 delivers exceptional high-resolution engraving, crucial for the fine details required in jewelry making and other applications.
• Rapid Processing: With speeds 10+ times faster than competitors, what previously took minutes now takes seconds. Bring your masterpieces to life in a blink of an eye.

Tehnologie avansată

• Fiber Laser Source: The ComMarker B4’s fiber laser source uses advanced technology to create a stronger, faster-moving laser output, resulting in faster, Mai adânc, and more accurate engraving.
• High-Precision Field Mirror: Increases energy density and collimates the laser beam at one point, enhancing accuracy and speed.
• Galvano Scanner and Field Lens: Drives precise, quick laser movement.

Versatility and Compatibility

• Compatibilitatea materialelor: Engraves a variety of metals, inclusiv aurul, argint, platină, and alloys, as well as non-metal materials like plastic and leather.
• Handheld Function: A portable handle offers optimal range of movement, making engraving on larger, irregularly shaped objects a breeze.

User-Friendly Design

• Intuitive Operation: Capturați și încărcați rapid imagini cu aplicația ușor de utilizat, editați-le pentru a obține rezultatele dorite, and create your own private gallery of laser-engraved masterpieces.
• Gravura pe lot: Perform batch engravings with high efficiency. The ComMarker B4 memorizes patterns, even when disconnected or reset, increasing efficiency for mass production.

Additional Benefits

• Longevity and Low Maintenance: The laser cu fibră source has a typical lifetime of 100,000 ore, ensuring over 10 years of full-time work. Low maintenance needs translate to reduced overall costs.
• Masuri de siguranta: Equipped with high-level safety protection, including an emergency stop function and high-quality safety goggles to protect your eyes.
• Compact and Portable: Small size (382756cm) and light weight (3KG handle) make it ideal for those with limited space but who still want the features and power of an industrial system.

Reviews and Testimonials

Marco Reps: “Check out this FRESH REVIEW from Marco Reps!”

Garaj pentru trepiede: “Check out this FRESH REVIEW from Tripods Garage!”

Creatorul suedez: “Check out this FRESH REVIEW from The Swedish Maker!”

About ComMarker

ComMarker has been involved in the laser engraving and marking industry for more than 10 ani. Since emerging on the international market in 2020, it has established trading partners in multiple countries, including Germany, the United States, Japonia, and Malaysia. ComMarker products are available on international sales platforms like Amazon, AliExpress, and Alibaba, enjoying robust sales across six continents.

ComMarker provides engraving and marking solutions for startup entrepreneurs, magazine, și fabrici mici. As a pioneer of desktop industrial laser marking machines, ComMarker helps thousands of small and medium-sized businesses achieve convenient marking and engraving experiences.

Specifications for ComMarker B4 Fiber Laser Engraver

Fiber laser marking has become a cornerstone of modern engraving, thanks to its unmatched precision and adaptability. ComMarker, a trailblazer in this field, offers top-tier fiber laser engravers designed for both industrial and personal use. This article delves into the unique attributes of ComMarker fiber lasers, highlighting their capabilities and applications across various sectors.

What is a ComMarker Laser?

A ComMarker laser is a state-of-the-art fiber laser engraver renowned for its precision, viteză, si versatilitate. It caters to a wide array of marking and engraving needs, from delicate jewelry designs to robust industrial applications.

Key Features of ComMarker Lasers:

1. Precizie și viteză: ComMarker lasers are celebrated for their high precision and fast engraving speeds, suitable for both detailed and large-scale projects.
2. Durabilitate și fiabilitate: Constructed with robust components, these lasers ensure long-term reliability and consistent performance.
3. Interfață ușor de utilizat: ComMarker lasers come with intuitive software that simplifies the engraving process, making it accessible even for beginners.
4. Fiber Optics Technology: This technology directs a laser beam through a doped fiber optic cable, achieving high-intensity, precise marking on various materials.

How Does a ComMarker Laser Compare to Other Fiber Lasers?

When pitted against other fiber lasers, ComMarker stands out due to several distinct advantages:

Innovative Design

ComMarker lasers feature advanced design elements that enhance performance and user experience. The integration of cutting-edge technology ensures optimal efficiency and precision.

Aplicații versatile

While standard fiber lasers are known for their versatility, ComMarker lasers excel with specialized settings tailored to specific applications, such as color engraving and deep metal marking.

Software ușor de utilizat

The software provided with ComMarker lasers is intuitive and easy to use, even for those new to laser engraving, contrasting with some systems that may have steeper learning curves.

Funcții de siguranță îmbunătățite

ComMarker prioritizes user safety with built-in protective measures, including safety enclosures and advanced ventilation systems.

Eficiența costurilor

Despite their advanced features, ComMarker lasers offer competitive pricing, making high-quality laser engraving technology accessible to a broader range of users.

How Do ComMarker Fiber Lasers Engrave in Color?

Una dintre caracteristicile deosebite ale ComMarker fiber lasers is their ability to engrave in color. This opens up new possibilities for customization and artistic expression.

Color Engraving Process:

1. Laser Parameter Adjustment: By finely tuning the laser’s speed, frecvență, si putere, different oxidation levels are achieved on the material’s surface, resulting in various colors.
2. Interacțiunea materială: The color change occurs due to the interaction between the laser beam and the material, creating a thin oxide layer that reflects light differently, producing the desired color.
3. Control de precizie: ComMarker’s advanced software allows for precise control over these parameters, enabling vibrant and intricate color designs on metals like stainless steel and titanium.

What Materials Can I Work with Using a ComMarker Laser?

ComMarker fiber lasers are designed to work with a wide range of materials, making them incredibly versatile.

Metalele

• Oţel inoxidabil: Ideal for high-contrast markings and color engraving.
• Aluminiu: Suitable for detailed engravings and high-speed marking.
• Cupru: Despite its reflective nature, ComMarker lasers can effectively engrave copper with high peak power settings.
• Gold and Silver: Perfect for intricate designs on jewelry and accessories.
• Brass and Titanium: Used for industrial components and high-durability applications.

Materiale plastice

• PVC, PE, and ABS: Common in various industries for identification, trasabilitatea, and branding.
• Polycarbonate and Acrylic: Used for signage and product labeling.

Alte Materiale

• Carbon Fiber: Easily marked with high contrast.
• Ceramics and Glass: Used for precision marking in specialized applications.

What Are the Industrial Applications of ComMarker Fiber Lasers?

ComMarker fiber lasers are widely used across various industries due to their versatility, precizie, and reliability.

Industria auto

• Part Identification: Marking engine parts, chassis numbers, and other components for traceability.
• Dashboard Components: Day and night visibility markings on buttons and controls.
• Safety Components: Marking seat belts, airbags, and other safety features with serial numbers and barcodes.

Industria electronică

• Component Marking: Engraving on circuit boards, capacitors, and connectors for identification and traceability.
• Electronica de consum: Marking logos and serial numbers on smartphones, laptopuri, and other devices.

Industria medicală

• Instrument Marking: Engraving surgical instruments with identification numbers for traceability and sterilization.
• Dispozitive medicale: Marking prostheses and implants with unique identifiers.

Aerospace Industry

• Component Identification: Marking parts with serial numbers and batch codes for traceability and safety.
• Material Processing: Engraving on lightweight materials used in aircraft construction.

Jewelry Industry

• Personalizare: Engraving intricate designs, logo-uri ale mărcii, and personalized messages on precious metals.

What Are the Home-Based Applications of ComMarker Fiber Lasers?

ComMarker fiber lasers are not just for industrial use; they also offer numerous applications for home-based businesses and hobbyists.

Cadouri personalizate

• Custom Engravings: Create personalized gifts such as engraved jewelry, priveste, and photo frames.
• Unique Designs: Add custom designs and messages to everyday items like keychains and phone cases.

Proiecte de bricolaj

• Crafting and Hobbies: Engrave on wood, Piele, and acrylic for DIY projects and crafts.
• Decoratiune interioara: Create custom home decor items, including engraved signs, arta de perete, and coasters.

Small Business Products

• Product Branding: Mark products with logos and brand names for small businesses.
• Ambalare: Engrave packaging materials for a professional and personalized touch.

Educational Use

• STEM Projects: Use laser engravers for educational projects in science, tehnologie, Inginerie, and math.
• Art and Design: Enhance art and design projects with precise laser engraving.

Concluzie

ComMarker fiber lasers offer unparalleled precision, versatilitate, and reliability for a wide range of applications, from industrial to home-based projects. Whether you are in the automotive, Electronică, medical, aerospațială, or jewelry industry, or looking to create personalized gifts and DIY projects, ComMarker lasers provide the perfect solution. Explore the capabilities of ComMarker fiber lasers and discover how they can elevate your projects to new heights. Take action today and experience the cutting-edge technology of ComMarker fiber lasers. For more information and to find the perfect laser for your needs, visit ComMarker’s official website.

What is Fiber Laser Cutting?

Fiber laser cutting is a highly efficient laser cutting technique that utilizes a high-power laser beam focused through a fiber optic cable. This cable is composed of flexible glass fibers that guide the laser beam to the cutting head. The precision and small spot size of the laser enable intricate shapes and high-accuracy cuts, making it an essential tool in various industries.

How Does Fiber Laser Cutting Technology Work?

Fiber laser cutting technology operates through a series of well-coordinated steps:

1. Laser Beam Generation: The process begins with a laser diode that generates the initial laser beam. This beam is then amplified within the fiber optic cable, which is doped with rare-earth elements such as ytterbium.
2. Beam Focusing: The amplified laser beam is focused through a lens, creating a highly concentrated energy spot.
3. Interacțiunea materială: When the focused laser beam contacts the material, it melts, arsuri, or vaporizes it. An assist gas, like nitrogen or oxygen, blows away the molten or vaporized material, resulting in a precise cut.
4. Motion Control: Advanced software and computer numerical control (CNC) systems guide the cutting head along the desired path, enabling the machine to cut complex shapes with high accuracy.

What Metals Can Be Cut With Fiber Laser Cutting Machines?

Fiber laser cutting machines are versatile and can cut a variety of metals, inclusiv:

• Oţel inoxidabil: Ideal for applications requiring corrosion resistance and strength, such as in the medical, food processing, and automotive industries.
• Oțel carbon: Commonly used in construction and manufacturing due to its strength and durability.
• Aluminiu: Widely used in aerospace and automotive industries due to its lightweight and high reflectivity properties.
• alamă și cupru: Fiber lasers efficiently cut these conductive and reflective metals, making them suitable for electrical components and decorative items.
• Titan: Essential in aerospace, medical, and military applications for its strength and corrosion resistance.
• Nickel Alloys: Used in high-temperature and corrosive environments, these alloys are cut effectively by fiber lasers.

How Deep Can a Fiber Laser Cut?

The cutting depth of a fiber laser depends on several factors:

• Putere laser: Higher power lasers can cut through thicker materials. De exemplu, A 1 kW laser can cut through stainless steel up to 4-5 mm thick, while a 3 kW laser can handle thicknesses up to 12-15 mm.
• Material Type: Different materials have varying thermal conductivities and reflectivities, affecting the cutting depth. Metals like aluminum and copper require more power due to their reflectivity.
• Assist Gas: The type of assist gas can influence the cutting process. Oxygen, de exemplu, can increase cutting speed and depth for carbon steel due to the exothermic reaction it causes.
• Cutting Speed and Focus Quality: Proper focus and a high-quality optical system result in a smaller spot size, higher energy density, and deeper cuts. The cutting speed also plays a role; slower speeds allow for deeper cuts.

În general, fiber lasers can cut metals up to several centimeters thick, but the exact depth varies based on the material and cutting conditions.

Advantages of Fiber Laser Cutters

Fiber laser technology offers several benefits over other cutting methods:

• Precizie ridicata: The small spot size and high energy density allow for precise and intricate cuts, making fiber lasers suitable for detailed work.
• De mare viteză: Fiber lasers can cut materials quickly, enhancing productivity and efficiency in high-volume applications.
• Low Operating Costs: Fiber lasers are highly efficient and require minimal maintenance, leading to lower operating costs over time.
• Versatilitate: The ability to cut a wide range of materials and handle various applications makes fiber laser cutting machines highly versatile.

Applications of Fiber Laser Cutting Machines

Fiber laser cutting machines are used across numerous industries:

• Automotive: Cutting parts for automobiles, including body panels, exhaust systems, and suspension components.
• Aerospace: Manufacturing components for aircraft, such as engine parts, fuselage panels, and landing gear.
• Medical: Producing medical devices, including implants, surgical instruments, and prosthetics.
• Electronică: Fabricating components for electronic devices, including circuit boards and computer parts.
• Bijuterii: Crafting intricate designs and patterns in precious metals for jewelry.

How much does a fiber laser cutter cost?-Tăiere cu laser cu fibre ComMarker B4

The ComMarker B4 Fiber Laser Engraver is a cutting-edge machine designed to deliver high precision and efficiency in laser cutting and engraving. Engineered with advanced fiber laser technology, the ComMarker B4 is tailored to meet the diverse needs of industries ranging from automotive to electronics. Here’s an overview of what makes the ComMarker B4 an exceptional choice for your cutting and engraving needs:

Caracteristici cheie:

• High Precision Cutting: The ComMarker B4 utilizes a high-power laser beam focused through a fiber optic cable, enabling it to cut intricate shapes and patterns with unparalleled precision.
• Compatibilitate versatilă a materialelor: This machine is capable of cutting a wide range of materials, including metals such as stainless steel, otel carbon, aluminiu, alamă, cupru, și titan. It can also handle non-metallic materials like plastics, ceramică, and glass.
• Efficient Operation: Cu tehnologia sa avansată cu laser cu fibră, the ComMarker B4 offers high cutting speeds and low operating costs. It requires minimal maintenance, making it a cost-effective solution for both small and large-scale operations.
• Interfață ușor de utilizat: The ComMarker B4 comes with intuitive software (Ezcad pentru Comker) that allows for easy operation and customization of cutting and engraving parameters. This ensures a smooth workflow and consistent results.
• Construcție robustă: Built with durability in mind, the ComMarker B4 features a sturdy design that ensures stability and longevity, even under continuous operation.
• Funcții de siguranță îmbunătățite: The machine includes comprehensive safety measures, such as protective enclosures and advanced ventilation systems, to ensure a safe working environment.

Gravoare laser cu fibră ComMarker B4 20W

Evaluat 5.00 din 5 bazat pe 11 evaluările clienților

(11 recenzii ale clienților)

$1,999 $1,499 Salvați:$500

Ridicare electrică: ComMarker B4-20W dispune de un sistem avansat, motor de ridicare ascuns. 3D embosare și gravură adâncă: B4-20W mașină de gravat cu laser mânerele complicate, gravare 3D pe mai multe niveluri și gravare profundă pe metal și rocă. Zona de lucru spatioasa: 110lentile duble mm și 200 mm, zona de marcare cu locatoare duble cu puncte roșii pentru calibrare și focalizare precisă. Compatibilitate largă: Grava…

Rotativ Cant

0 rotativ

D69*1 Rotativ

D69+D80 Rotativ

D80 Rotativ

Alege o opțiune0 rotativD69*1 RotativD69+D80 RotativD80 Rotativ

Putere

110V

220V

Alege o opțiune110V220V

clar

Gravoare laser cu fibră ComMarker B4 20W cantitate

Adaugă in coş

Categorie: Gravoare cu laser, Seria B, Gravoare laser cu fibre B4, Gravoare cu laser cu fibre

Aplicații:

• Automotive: Ideal for cutting and engraving parts such as body panels, exhaust systems, and suspension components.
• Aerospace: Perfect for manufacturing precise components like engine parts, fuselage panels, and landing gear.
• Medical: Suitable for producing high-precision medical devices, implanturi, and surgical instruments.
• Electronică: Great for fabricating components for electronic devices, including circuit boards and computer parts.
• Bijuterii: Capable of crafting intricate designs and patterns in precious metals.

The ComMarker B4 Fiber Laser Engraver stands out as a versatile, eficient, and highly precise machine suitable for a broad range of applications. Whether you are in the automotive, aerospațială, medical, Electronică, or jewelry industry, the ComMarker B4 provides the cutting-edge technology you need to achieve superior results in your production processes.

1.Conectați mașina: Attach the gravator laser cu fibra to the rotary chuck A and place the rotary on the work table.

2.Clamp the Object: Use the anticlockwise mode to clamp a cylindrical object or the clockwise mode to support a ring.

3.Adjust Angle: If necessary, lift or lower the rotary chuck to change its angle for optimal marking.

Operație fizică (Rotary B)

1.Conectați mașina: Attach the fiber laser engraver to the rotary chuck B and place the rotary at the correct angle as shown.

2.Clamp the Object: Use the positive mode or negative mode to clamp the cylindrical object as indicated.

3.Adjust Elevation: Elevate the rotary chuck with a support if needed to ensure the machine can mark at the right focus point.

Operație fizică (Rotary C)

1.Conectați mașina: Attach the fiber laser engraver to the rotary chuck C.

2.Place the Object: Position the cylindrical object on the roller for marking.

Software operation

Text Marking

1. Input Text:
   • Enter the text you wish to engrave.
   • Click “Apply” and then the “Center” button.

2.Enable Hatch Mode:

• Click the “H” button, tick “Enable”, and then click OK.
• Notă: Do not tick “Mark Contour” or “All Cala”.

3.Select Laser Option:

• From the menu, select “Laser”.
• Choose “Rotate TextMark” for simple text marking.

4.Configure Parameters (Param F3):

• Click “Param (F3)” and set “configuration markcfg0”.
• Tick “Enable”.
• Input the pulses per round number as “12800”.
• Adjust scale compensation if necessary to affect text spacing.
• Tick “Reverse” if you want to change the marking order of the words.
• Select the appropriate axis (X or Y) based on the rotary’s placement direction.
• Clic “Bine (confirma)”.

5.Preview and Mark:

• Click “Red (F1)” to preview; the red light area indicates the first letter of the first line.
• Press “ESC” to exit preview, adjust the rotary chuck location if needed.
• Ensure the red rectangle preview is on the top of the cylinder for level surface engraving.
• Click “Mark” to start engraving.

Graphics Marking

1.Import a Vector File:

• Click the “Draw vector file” button.
• Click “Put to Origin” button.
• Click the “H” button, tick “Enable”, and select “Z” hatch mode.
• Notă: Do not tick “Mark Contour” or “All Cala”.
• Notă: Bitmap files are not suitable for rotary cylinder marking.

2.Select Rotary Mark:

• In the menu, choose “Rotary Mark”.

3.Configure Split Line:

• Tick “Mark by split line”.
• Input the object diameter.
• Set the middle lines:
  • Double-click to create a line.
  • Right-click to delete a line.
  • Drag with the mouse to move a line.
• Ensure the diameter number matches the object’s diameter.

4.Force All Split (Alternative):

• Tick “Force all split”.
• Input the object diameter and adjust the “Split Size”.

5.Configure Parameters (Param F3):

• Click “Param (F3)” and set the parameters.
• Tick “Enable”.
• Input the pulses per round number as “12800”.
• Tick “Reverse” if you want to change the marking order of the words.
• Select the appropriate axis (X or Y) based on the roller’s placement direction.
• Click “Rotate Axis”.
• Adjust the Gear Ratio number to avoid overlaps or gaps in the marking graph:
  • A higher number reduces overlap.
  • A lower number reduces gaps.
  • Test different numbers for accuracy (to two decimal places) until satisfied.
• Clic “Bine (confirma)”.

6.Preview and Mark:

• Click “Red (F1)” to preview; the red light area shows the first part divided by the split line.
• Press “ESC” to exit preview, adjust the rotary location if needed.
• Click “Mark” to start engraving.

How to Replace the 110mm Field Lens with a 200mm Field Lens on a Gravura laser cu fibra?

Installation Steps

Etapa 1: Install the 200mm Field Lens

• Remove the 110mm lens by unscrewing it by hand.
• Install the 200mm field lens by screwing it in place.

Etapa 2: Re-adjust the Focus

• Adjust the focus since the focal length changes with the new lens.
• Refer to the operation manual, specifically the section on adjusting focus.

Etapa 3: Field Lens 9-Point Calibration

1.Open Calibration Software

• Open the USB folder.
• Open the “Ezcad pentru Comker” folder.
• Select the 200mm folder.
• Open the software “CorFile2” (ensure EZCAD is closed first).

2.Set Laser Source Parameters

• Click “F1”, set laser source parameters, select “IPG” and click “OK”.

3.Prepare Calibration Surface

• Stick two pieces of paperboard together on the back cover with tape.
• Place it on the work table ensuring the paperboard is flat.

4.Mark Calibration Points

• Click “F3” to mark a 9-point rectangle. The graph will display the marked points.

5.Adjust Pattern to Match Marking

• Click the button on the top-right corner to change the pattern until it matches the marking on the paperboard.

6.Measure and Input Coordinates

• Measure the coordinate position of each point on the paperboard.
• Use point 5 as the center coordinate (0,0).
• Input the measured coordinates into the corresponding columns in the dialog box.
• Clic “Bine” to save and return to the upper interface.

Notă: Ensure the ruler is absolutely horizontal or vertical and measurement lines go through the 9 points.

7.Generate Calibration File

• Clic “F6” to generate a calibration file.
• Specify a file name (de ex., “200 B4 ComMarker”).
• Save the file and remember the directory location.

8.Verify Calibration

• Clic “F7” to verify calibration.
• Open the saved calibration file.
• Click “F8” to mark the calibrated rectangle.

Notă: If the marked rectangle is regular, the calibration is successful. If deformed, recalibration is necessary.

9.Import Calibration File in EZCAD2

• Import the calibration file for the 200mm lens in EZCAD2.
• Refer to the operation manual for importing correction files.

Parameters for Marking a Photo

Notă: The following parameters are suggestions for a 20W machine engraving stainless steel. Results may vary based on file size, materiale, and focal length. Adjust parameters as needed for different machines or materials.

Parameters for B4 20W with 110x110mm Area on Stainless Steel

Input the parameters in the engraving software.

Fine-tune contrast and brightness of the picture for clearer engraving.

Parameters for B4 20W with 110x110mm Area on Painted Metal

Adjust the parameters according to the specific material.

Parameters for Marking Different Colors

Notă: The following parameters are suggestions for a 20W machine engraving stainless steel. Adjust parameters as needed for different machines or materials.

Lightburn Operation Tutorial for MacOS

1.Download and Install Lightburn Software

Download from Software -ul Lightburn.

Ensure the Lightburn version is V1.3.01 or higher.

2.Install Lightburn Software

Drag the Lightburn icon to the Applications folder.

3.Copy EZCAD Folder

Copy the folder “EZCAD for ComMarker B4” from the USB to the desktop.

4.Set Up Device

Open Lightburn, click “Create Manually”, and select “JCZ Fiber”.

Ensure the machine is on and connected via USB.

5.Import EZCAD Config and select the appropriate folder.

6.Select folder “110mm” (or 200mmaccordingtoyourlens)—->“ Plug”, and choose “markcfg7” andclick“next”

7.You can see the following window if everything goes right, and click “next”

8.Change the name if necessary, and input therightXandY Axis Length according to the lens. Click “next”

9.Click “finish” and it will in the device list

10.The status will change into “Ready” whenthemachineison and connected via USB

11. Go to “Basic Settings” from “Device setting” button, click “Load COR file”, Select “EZCAD for ComMarker B4”—>“110mm”, Choose file “JCZ11.cor”, Click “OK”

12.Change the setting of Freq “Min 20”, “Max 200”. Switchon “Galvo 2”. And it is ready to control themachinewithLightburn.*(Please refer to step 11 for MOPAmachine)

Special Setting for JPT MOPA fiber

13.Change the setting of Freq “Min 1”, “Max 4000”. Switch on “Galvo 2”. Switch on the button “Enable Q-PulseWidthSetting” (Make sure the Fiber Type is “IPG _YLP” or “JPT”)

Lightburn Operation Tutorial for Windows

• Follow the same steps as for MacOS.
• Install the necessary driver when installing Lightburn software.

Porniți puterea către acest dispozitiv atunci când este bine împământat. ONLY use this device with one hand at a time.
Laserul este alimentat de o conexiune de tensiune extrem de înaltă și de plapcingtwo mâinile pe mașină la un moment dat în timpul funcționării are potențialul de a crea un circuit închis cu The Humanbody,rezultând un șoc electric. Zona din jurul acestui dispozitiv de gravor cu laser trebuie să fie menținută uscată, bine ventilat, și temperatura controlată de mediu între 40-95 ° F (5-35°C). The ambient humidity should not exceed 70%.

Ghid de asamblare a gravorului cu laser B4 B4 B4

Utilizarea mașinii de gravură laser cu fibre B4 Commarker este simplă. Just follow the eight steps below to complete the process.

1. Puneți piesele pe masă

Începe prin despachetarea tuturor componentelor Gravoare laser cu fibră ComMarker B4. Pune -le pe un curat, flat surface to ensure you have all the necessary parts and tools before starting the assembly.

2. Așezați cuplarea pe locul potrivit al arborelui

Localizați arborele pe gravorul laser. Asigurarea că se potrivește perfect în locul său desemnat. Cuplarea este esențială pentru conectarea motorului la capul laser, allowing precise movements during operation.

3. Fixați cuplarea cu șuruburile încrustate

Odată ce cuplarea este în loc, Folosiți șuruburile incrustate prevăzute pentru a -l asigura strâns. This ensures the coupling stays firmly attached to the shaft during the engraving process.

4. Fixați polul de susținere cu șuruburile

Următorul, Poziționați polul de susținere vertical pe baza mașinii. Use the provided screws to fasten the pole securely. This pole supports the laser head and ensures stability during operation.

5. Puneți capul laser pe raftul de susținere și fixați șuruburile pentru a repara capul laser

Carefully place the laser head onto the supporting shelf. Align it properly and use the screws provided to fasten the laser head to the supporting shelf. Make sure the laser head is securely fixed to avoid any movement during engraving.

6. Puneți garnitura în partea de sus a polului, Înconjurând șurubul de plumb

Take the gasket and place it on top of the supporting pole, ensuring it circles the lead screw. The gasket helps reduce vibration and ensures smooth movement of the laser head along the pole.

7. Fixați mânerul manivelă cu un șurub și o garnitură

Attach the hand crank handle to the machine. Use a screw and a gasket to secure it in place. Mânerul manivelei de mână permite reglarea manuală a poziției capului laser, providing precision and control during setup and operation.

8. Conectați mașina laser cu computerul și porniți mașina

In cele din urma, Conectați -vă gravorul laser cu fibre B4 Commarker la computer folosind cablurile furnizate. Asigurați -vă că toate conexiunile sunt sigure. Odată conectat, porniți mașina. Urmați instrucțiunile software pentru a completa configurarea și începeți să utilizați your laser engraver.

Gravoare laser cu fibră ComMarker B4: Adunarea titularului auxiliar

Ghid de asamblare pas cu pas

1. Puneți piesele pe masă

Începeți prin a stabili toate părțile suportului auxiliar pe un curat, suprafață plană. Ensure you have all the necessary components and tools before beginning the assembly.

2. Conectați bara metalică și inelul mare cu șuruburile

Luați bara de metal și aliniați -o cu inelul mare. Folosiți șuruburile furnizate pentru a fixa în siguranță bara de metal pe inelul mare. This connection forms the primary structure of the auxiliary holder.

3. Fixați bara de metal și inelul mic cu șuruburi

Următorul, Atașați inelul mic la bara metalică folosind șuruburile. Ensure the small ring is securely fixed to provide stability to the auxiliary holder.

4. Fixați gulerul de fixare pe capul laserului cu șuruburile

Poziționați gulerul de fixare în jurul capului laser. Folosiți șuruburile pentru a fixa gulerul în siguranță. This step is essential to ensure the auxiliary holder is correctly aligned with the laser head.

5. Înșurubați celălalt inel mic pe gulerul de fixare

Luați celălalt inel mic și înșurubați -l pe gulerul de fixare. This additional ring helps stabilize the auxiliary holder and ensures precise positioning.

6. Înșurubați partea asamblată pe parcursul mai jos

Urmați diagrama de asamblare prevăzută cu gravorul laser cu fibră B4 Commarker B4 pentru a înșuruba piesele asamblate. Ensure all components are tightly secured to maintain the holder’s stability.

7. Reglați înălțimea suportului auxiliar în funcție de lungimea focalizării

Reglați înălțimea suportului auxiliar pentru a se potrivi cu lungimea de focalizare a gravorului laser. This step is crucial to achieve the correct focal point for precise engraving.

8. Fixați inelul mic pentru a repara suportul auxiliar cu punctul de focalizare drept

Odată ce ați reglat înălțimea, fixați inelul mic pentru a bloca suportul auxiliar în loc. Ensure the holder is fixed at the correct focus point to optimize engraving accuracy.

Cum să instalați driverele pentru gravorul cu laser cu fibre?

1.Instalați driverul

Notă: vă rugăm să efectuați următoarea operație înainte de a instala driverul
1) Aparatul este pornit;

2) Țineți butonul de urgență nu apăsat;

3) Cablu de date conectat

1. Deschideți gestionarea dispozitivelor

Începeți făcând clic dreapta pe “Acest PC” sau “Computerul meu” pe desktop sau în File Explorer. Din meniul contextual, selecta “Gestionează” to open the Computer Management window.

2. Accesați manager de dispozitive

În fereastra de gestionare a computerului, Faceți clic pe “Manager de dispozitiv” in the left-hand pane. This will display a list of all the hardware devices connected to your computer.

3. Localizați dispozitivul

În Manager dispozitive, look for “USBLMCV2”, “USBLMCV4”, or “Unknown Device” under “Other devices” or “Universal Serial Bus devices”. These entries represent your fiber laser engraver that needs the driver installed.

4. Actualizați driverul

Right-click on “USBLMCV2”, “USBLMCV4”, or “Unknown Device” and select “Actualizați driverul” from the context menu.

5. Căutați pentru șoferi

In the Update Driver Software window, choose “Browse my computer for drivers”. This option allows you to manually select the driver files from your computer.

6. Localizați fișierele de driver

Insert the USB drive that came with your fiber laser engraver into your computer. Navigați la unitatea USB din File Explorer și găsiți folderul care conține fișierele de driver corespunzător sistemului dvs. Windows. Selectați acest folder și faceți clic pe “Bine”.

7. Instalați driverul

Clic “Instala” Pentru a începe procesul de instalare a driverului. Follow any additional on-screen instructions to complete the installation.

8. Completați instalarea

Odată ce instalarea are succes, Faceți clic pe „Finalizare”. Acum ar trebui să vezi “Dispozitiv BJJCZ” enumerate sub managerul de dispozitive, indicating that the driver has been installed correctly.

Notat: *Este recomandat să copiați și să lipiți fișierele discului USB pe desktopul computerului sau pe alte computeruri de calculator. *Dacă instalarea șoferului nu are succes, please refer to FAQ 1

2. Deschideți software -ul

1. Accesați folderul USB:
   • Deschideți folderul USB care a venit cu dvs. gravator laser cu fibra.
   • Navigați la “Ezcad pentru Comker” folder.
   • Dacă obiectivul dvs. este de 110mm, select the 110mm folder.
2. Lansați ezcad2:
   • Open the software “EZCAD2” from the selected folder.
   • Poți intra “text”, import “imagine” sau “Fișier vectorial”. Pentru testarea inițială, it is recommended to select and test with text.

3. Importați fișierul de corecție

1. Deschideți setările parametrilor:
   • În Ezcad2, selecta “Parametru (F3)”.
   • Bifează “Folosiți fișierul corect”.
2. Selectați fișierul de corecție:
   • Alegeți fișierul care se termină în .cor din unitatea flash USB (sau fișierul care a fost copiat pe discul computerului).
   • Clic “Bine (confirma)” to apply the correction file.

4. Reglați focalizarea

1. Găsiți cel mai bun punct focal:
   • Use the up or down buttons to lift or lower the laser head until the three red light points overlap.
   • The point where these three red lights overlap is the optimal focal point for engraving.
2. Măsurați distanța focală:
   • Măsurarea distanței focale pentru această mașină este specifică obiectivului:
     • 110mm lentilă: _______ mm
     • 200mm lentilă: _______ mm
   • Distanța de măsurare este lungimea de la linia de jos a capului laser până la suprafața materialului de gravat. Acest parametru este măsurat manual, and each device may have different focal lengths due to variations in laser sources and field lenses.

Notă: Înainte ca mașina să iasă din fabrică, Am făcut corectarea luminii roșii (pentru 110 mm). La poziția unde se suprapun cele trei pete de lumină roșie, Laserul emite cea mai puternică lumină. in orice caz, Din cauza transporturilor, Punctul Focus al luminilor roșii pe care le -ați primit poate schimba, Iar punctul de focalizare nu ar fi cel mai bun focar. Vă rugăm să funcționați ca următori pași:

1. Puneți placa de testare din oțel inoxidabil

1. Poziționați placa de testare:
   • Place the stainless steel test plate on the machine table.

2. Reglați capul laser

1. Găsiți cel mai bun punct focal:
   • Ridicați sau coborâți capul laser la cel mai bun punct focal, as indicated by the handwritten number provided.

3. Porniți mașina și conectați -vă

1. Porniți și conectați:
   • Turn on the machine.
   • Connect the machine to the computer.

4. Importați text pentru testare

1. Încărcați parametrii testului:
   • Import the “TEXT” file for testing into the software.
   • Select the default parameters.
   • Tick the “continuous part” button.

5. Testați marcajul

1. Verificați zona de marcare:
   • Apăsați „roșu (F1)” to ensure the marking area aligns with the test material.
   • Click “mark” to start continuous marking with the laser.

6. Reglați intensitatea laserului

1. Optimizați puterea laserului:
   • În timp ce laserul marchează, lift or lower the laser head.
   • Observe the change in laser beam intensity.
   • Stop adjusting when the laser works with the strongest beam.

7. Aliniați lumina roșie auxiliară

1. Slăbiți șuruburile:
   • Loosen the screws for the two beams of the auxiliary red light.
2. Suprapuneți punctele de lumină roșie:
   • Manually adjust the relative position of the red light dots to make them overlap.

8. Asigurați poziția

Reglați manual poziția relativă a theredlightdotsto, faceți -le să se suprapună. Și strângeți șuruburile

5.Test de notare

1. Pregătiți materialul:
   • Place the test engraving material on the machine.
2. Verificați zona de marcare:
   • Clic “roșu (F1)” to ensure the marking area aligns with the test material.
3. Începeți marcarea:
   • Tick “Default Parameters”.
   • Clic “Marca (F2)” to start marking.

Parametrii

Accesorii

FAQ: Gravura laser cu fibra ComMarker B4

Î1: Instalarea driverului a eșuat?

1. Verificați -vă sistemul Windows: Asigurați -vă că utilizați un sistem Windows autorizat. Dacă nu, try using another computer.
2. Înlocuiți cablul de date: Use a magnetic-proof data cable for better results.
3. Verificați porturile USB: Porturile USB din față pe carcasele desktop sunt adesea deteriorate. Try using rear USB ports or another computer.
4. Starea mașinii: Asigurați -vă că mașina este pornită, butonul de urgență nu este apăsat, and the data cable is properly connected.
5. Contactați asistență: Dacă problemele persistă, contact after-sales support or email us.

Q2: The driver in the device manager is different from the instruction in this manual.

• Șoferi conflictuali: Această problemă apare dacă un alt șofer, cum ar fi șoferul de lumină, este instalat. Uninstall the incorrect driver and delete it.

Q3: The USB flash drive is damaged and cannot be opened.

• Descărcați de pe site -ul web: Visit ComMarker’s official website to download the B4 driver and software.
• Contactați asistență: Email the after-sales team for assistance.

Î4: Previzualizarea luminii roșii funcționează cu un dreptunghi, but there is no mark or the marks are very light.

• Reglați distanța focală: Consultați pasul 4 of the operation instructions for adjusting the focal length.
• Contactați asistență: Dacă problema persistă, email the after-sales team.

Î5: Nu pot găsi dongle, Software -ul funcționează în modul demo, or fails to open the LMC driver.

• Check Connections: Ensure the machine is powered on and connected to the computer via the data cable.

Î6: Butonul sus și jos nu funcționează; the machine does not move when pressing the button.

• Adjust Coupling: Readjust the angle of the coupling and refix it with screws.

Î7: Mărimea previzualizării și a zonei de gravură nu este în concordanță cu dimensiunea software -ului, Previzualizarea luminii roșii nu este în concordanță cu poziția reală de gravură, or the preview and the mark are not horizontal or vertical but angled.

1. Import Calibration File: Use the calibration file from the USB drive included with the machine. Consultați pasul 3 of the operating instructions.
2. Manual Adjustment: Selecta “Parametru (F3)”, apoi “Alte” și “Red light pointer”. Input numbers in “Offset X” și “Offset Y” based on the actual deviation.
3. Contactați asistență: If the problem persists, contact the after-sales team by email.

Î8: Cum să schimbați zona de marcare fizică în software?

• Adjust Field Parameters: Clic “Parametru (F3)”, then select “Field”. Input numbers in “Offset X”, “Offset Y”, sau “Unghi” based on measurements with a ruler.

Q9: Some of the engraving areas are clear while others are light.

Clean Field Lens: Ensure the field lens is clean. If dirty, clean it carefully.

Check Optical Path: Ensure that the front and rear of the optical path are level. Loosen and refix the screws connecting the column and the optical path.

Asigurați perpendicularitatea: Ensure the oval base of the pole is perpendicular to the pole.

Strângeți șuruburile: Re-tighten the screws of the metal parts supporting the optical path.

Q10: There is only one dot of preview and marking laser.

• Verificați puterea galvanometrului: Scoateți capacul de pe calea optică și verificați dacă cablul DB15 sau DB25 este deconectat. Reconnect if necessary.

Q11: Lumina roșie de previzualizare nu este clară, or there is no preview red light.

• Reglați sursa de lumină roșie: Scoateți capacul capului laser, Reglați manual sursa de lumină roșie, Mutați -vă și reparați -l din nou, or disassemble and reinstall.

Q12: Nothing displays on the canvas board when importing text or pictures.

• Conținut de centru: Click the practical center button to center the picture and text on the canvas.

Q13: Laserul devine mai slab, and the engraving effect worsens.

1. Clean Field Lens: Curățați obiectivul de câmp cu o cârpă curată. Dacă capacul lentilei nu este eliminat în timpul marcării, it can cause pollution and weaker laser performance.
2. Înlocuiți obiectivul de câmp: Dacă obiectivul de câmp este prea poluat, it may need to be replaced.

Q14: Ce versiune de software Lightburn este potrivită pentru Commarker B4?

• Existing License: Purchase the “Add Galvo devices to existing license key” if you already have the software for a gantry type.
• New License: Choose the “LightBurn- Galvo license key” if you haven’t bought any license yet.

În acest ghid cuprinzător, we’ll delve deep into the distinctions between these two technologies, focusing on their uses, benefits, and the specific capabilities of the CommMarker fiber laser engraver.

Înțelegerea tehnologiei de gravură cu laser

Laser engraving is a versatile process used to etch designs, text, or images onto various materials. The technology employs a focused laser beam to remove material, creating precise and intricate patterns. The two main types of laser engravers are CO2 and fiber lasers, each utilizing different methods to generate and manipulate the laser beam.

Gravoare cu laser CO2

How They Work
CO2 laser engravers use a gas mixture primarily composed of carbon dioxide, which is excited by electrical energy to produce a high-intensity laser beam. This beam is then directed through a series of mirrors and a focusing lens to the material surface. The wavelength of CO2 lasers is around 10,600 nanometri, which is effective for cutting and engraving a wide range of non-metal materials.

Applications and Materials
CO2 lasers are highly versatile and can work with various materials, inclusiv:

Lemn: CO2 lasers can engrave and cut wood with great precision, making them ideal for woodworking projects, cadouri personalizate, and signage.
Acril: Clear and colored acrylics can be engraved and cut with smooth edges, perfect for display cases, premii, and artistic designs.
Piele: Both natural and synthetic leathers can be engraved for fashion accessories, custom patches, and detailed artwork.
Sticlă: While direct engraving on glass can be challenging, CO2 lasers can etch patterns with a frosting effect, often used for decorative items and glassware.
Paper and Cardstock: Ideal for creating intricate patterns for invitations, greeting cards, and paper art.
Cauciuc: Used for making custom stamps and gaskets.
Țesătură: CO2 lasers can cut and engrave various textiles for fashion, upholstery, and craft projects.

Avantaje
Versatilitate: CO2 lasers can engrave and cut a wide range of non-metal materials, making them suitable for diverse applications.
Accesibilitate: Generally more cost-effective than fiber lasers, CO2 engravers are accessible to small businesses, pasionați, and educational institutions.
Larger Workbed Options: CO2 lasers often come with larger workbed sizes, allowing for the processing of bigger pieces of material.
Disadvantages
întreținere: Requires regular maintenance, including mirror alignment, bed leveling, and cooling system upkeep.
Setup Complexity: Involves a more complex setup process, including venting exhaust and aligning optical components.
Limited Metal Engraving: While CO2 lasers can mark coated metals, they are ineffective for engraving bare metals without special marking agents.

Gravoare cu laser cu fibre

How They Work
Gravoare laser cu fibra, like the CommMarker, generate laser beams through a fiber optic cable doped with rare elements such as ytterbium. This method produces a laser beam with a wavelength of approximately 1,064 nanometri, which is highly absorbed by metals and other hard materials. The beam is directed through a galvanometric system (galvo) with fast-moving mirrors that accurately position the laser on the material surface.

Applications and Materials
Fiber lasers are particularly effective for metal engraving but can also work with other hard materials. Aplicațiile comune includ:

Metalele: Fiber lasers can engrave a wide range of metals, including aluminum, alamă, oţel inoxidabil, aur, argint, titan, and more.
Hard Plastics: Certain hard plastics can be engraved with fiber lasers, often used for industrial components and identification tags.
Piatră: Materials like granite, marmură, and brick can be engraved for memorials, architectural details, and decorative items.
Bijuterii: Precision engraving on rings, bratari, and other jewelry pieces.

Avantaje
Precizie ridicata: Laser cu fibră, such as the CommMarker, offer unparalleled precision and detail, making them ideal for intricate designs and small text.
Întreținere redusă: Fiber lasers require minimal maintenance compared to CO2 lasers, with no need for mirror alignment or cooling systems.
Viteză: The galvo system in fiber lasers allows for rapid engraving speeds, increasing productivity.
Durabilitate: Fiber lasers have a longer operational lifespan and higher energy efficiency.
Compatibilitate cu metale: Capable of engraving various metals without the need for additional marking agents.
Disadvantages
Cost: Generally more expensive than CO2 lasers, making the initial investment higher.
Material Limitations: Less versatile in terms of the variety of materials they can process, primarily focusing on metals and hard plastics.
Smaller Workbeds: Typically come with smaller workbed sizes, which can limit the size of the pieces you can work on.

CommMarker fiber laser engraver key features

High Precision and Speed: The CommMarker uses advanced galvo technology, ensuring high-speed engraving with precise accuracy. This is crucial for detailed work on jewelry, industrial components, and intricate designs.

Software ușor de utilizat: Initially limited to EZCAD (Windows only), the CommMarker is now compatible with LightBurn, a popular laser software known for its intuitive interface and powerful features.

Minimal Setup and Maintenance: Setting up the CommMarker is straightforward—simply plug it in, turn on the switches, and start engraving. It requires minimal maintenance, with no need for mirror alignment or complex cooling systems.

Versatile Lens Options: The CommMarker offers various F-theta lens sizes, allowing users to choose the appropriate lens for their specific application, whether it’s maximizing power or increasing the marking area.

Masuri de siguranta: Includes specialized laser safety glasses to protect users from laser exposure. While the workbed is open, users can create DIY enclosures for additional safety.

CommMarker fiber laser engraver Applications and Use Cases

Gravură de bijuterii: The CommMarker fiber laser engraver excels at engraving small, detailed designs on rings, bratari, and other jewelry items. Its high precision ensures that even the tiniest details are captured accurately.
Marcaj industrial: Ideal pentru marcarea numerelor de serie, coduri de bare, and logos on metal components, the CommMarker fiber laser engraver is widely used in the aerospace, auto, and manufacturing industries.
Cadouri personalizate: Personalizing metal items such as flasks, brelocuri, and tools is made easy with the CommMarker fiber laser engraver’s precise and permanent engraving capabilities.
Dispozitive medicale: Engraving medical instruments and devices with unique identifiers for traceability and compliance with industry standards.

Comparing CO2 and Fiber Lasers: Which One Should You Choose?

1.Consider Your Materials
If you primarily work with non-metal materials such as wood, acril, Piele, and paper, a CO2 laser engraver is likely the better choice. Its versatility and cost-effectiveness make it suitable for a wide range of applications.
If you focus on metal engraving or require high precision for hard materials, a fiber laser engraver like the CommMarker is the superior option. Its ability to engrave metals with high accuracy and speed is unmatched.

2.Consider Your Budget
Gravoare cu laser CO2: Generally more affordable, making them accessible for hobbyists, întreprinderi mici, and educational institutions.
Gravoare cu laser cu fibre: Higher initial investment but offer lower long-term maintenance costs and greater efficiency, making them a wise choice for industrial applications and businesses with specific engraving needs.

3.Consider Your Work Volume and Speed
Lasere cu CO2: Suitable for lower volume and less time-sensitive projects due to their slower engraving speeds.
Lasere cu fibra: Ideal for high-volume, time-sensitive projects where speed and precision are crucial. The galvo system in fiber lasers allows for rapid processing without compromising on quality.

4.Consider Maintenance and Ease of Use
Lasere cu CO2: Require regular maintenance, including mirror alignment and cooling system upkeep. The setup process can be more complex and time-consuming.
Lasere cu fibra: Low maintenance with minimal setup requirements. The CommMarker fiber laser engraver, de exemplu, is easy to set up and operate, allowing you to focus on your projects rather than upkeep.

Concluzie: Making the Right Choice
Choosing between a CO2 and fiber laser engraver ultimately depends on your specific needs, buget, and the materials you work with. Both types of gravatoare cu laser have their unique advantages and applications, making them suitable for different users and industries.