木材是激光雕刻最受欢迎的材料之一. 从自定义标志到个性化礼物, it’s versatile, natural, and always in demand. But there’s one common frustration: burn marks and charring.
If you’ve ever tried to engrave a wooden piece only to see dark edges or scorched surfaces, 你并不孤单. The good news? 用正确的方法, you can achieve 脆, clean engravings on wood without burning.
在本指南中, we’ll break down the best 设置, 技巧, and pro tips to help you master the art of wood engraving.
Why Does Wood Burn During Laser Engraving?
Before fixing the problem, it’s important to understand why it happens. Burning usually occurs because:
- Too much power: High wattage burns rather than engraves.
- Low speed: The laser spends too long on the same spot.
- Resin and oils: Some woods (像松) naturally darken or burn more easily.
- Lack of airflow: Smoke and debris accumulate, scorching the surface.
Choosing the Right Wood for Engraving
Not all woods engrave the same way. Picking the right material makes a huge difference.
✅ Best woods for engraving: 枫, 桤木, 桦木, Cherry — light-colored, fine-grained woods.
⚠️ Woods to avoid: 松树, 橡木, and oily hardwoods — they burn or char more easily.
👉 对于提示: Test a small sample piece first. Even within the same species, wood density can vary.
Laser Settings for Clean Wood Engraving
Dialing in your settings is key to avoiding burn marks.
- 力量: Start low (10–30%) and increase gradually.
- 速度: Higher speeds (300–600 mm/s on diode, faster on CO₂) reduce scorching.
- 频率 (if adjustable): Lower frequencies minimize heat buildup.
- 通行证: Use multiple light passes instead of one heavy pass.
👉 对于提示: Every laser engraver behaves differently. Keep a log of test settings for each type of wood you use.
Techniques to Reduce Burning on Wood
1. Masking Tape Method
Cover the wood with painter’s tape or transfer tape before engraving. It absorbs excess heat and prevents smoke stains. 雕刻后, peel off the tape for a clean finish.
2. 使用空气辅助
Air assist blows away smoke and debris while cooling the engraving area. This reduces charring and improves line sharpness.
3. Proper Focus
Ensure your laser is properly focused. A blurred beam creates wider burns and less precision.
4. Clean Your Optics
Dirty lenses and mirrors scatter the beam, causing overheating and burn marks. Regular cleaning is essential.
5. Sand and Finish
Light sanding after engraving removes minor scorch marks. Applying finishes like clear coat, beeswax, or mineral oil can enhance contrast without burning.
Advanced Pro Tips for Flawless Engraving
- Defocus Slightly: Move the focus a bit above the surface (0.5–1 mm). This spreads the heat and prevents overburn.
- Engrave in Multiple Layers: Shallow engravings layered gradually give better detail and less burn.
- Directional Engraving: Change the engraving angle (例如, 45° instead of horizontal) to reduce heat lines.
- Pre-treat with Baking Soda Spray: Lightly spraying wood with a baking soda solution can help achieve cleaner marks (test first!).
要避免的常见错误
- Running your engraver at full power on wood.
- Using dark, oily, or resin-heavy woods.
- Skipping air assist.
- Engraving without testing on a scrap piece first.
ComMarker Omni 1 激光雕刻机
下一代激光解锁所有材料. ZeroBurn™ 雕刻技术 世界第一台 16K 高清激光雕刻机 10,000mm/s SpeedMax™ 雕刻系统 使用紫外激光解锁所有材料 ColdFront™ 热技术 电动升降 2 可选镜头兼容 EZCAD 和 LightBurn 360° 旋转雕刻系统
结论
学习 how to engrave wood without burning comes down to the right combination of 材料, laser settings, 和雕刻技术. With masking tape, 空气辅助, and multiple light passes, you can achieve clean, professional results every time.
Whether you’re making signs, 装饰品, or personalized gifts, 这些 pro tips and tricks will help you engrave like a professional — no burn marks included.