当涉及精确标记和雕刻时, 紫外线 (紫外线) and fiber lasers each offer unique strengths. 康马克的 奥姆尼 1 紫外激光雕刻机, B6 MOPA Fiber Laser Engraver, and the high-power 泰坦 1 JPT MOPA光纤激光雕刻机 cover the full spectrum of engraving needs—from ultra-fine detail on delicate materials to heavy-duty metal cutting. This guide will help you decide between UV and fiber—and, if you need serious power, why Titan 1 might be your best bet.
1. 紫外线与. 光纤激光器: Quick Technology Breakdown
| 特征 | 紫外激光 (奥姆尼 1) | 光纤激光器 (泰坦 1 JPT莫帕) |
|---|---|---|
| 波长 | 355 纳米 (cold light) | 1064 纳米 (红外线的) |
| 电源选项 | 5 瓦 / 10 紫外线 | 60 瓦 / 100 瓦 / 200 瓦 |
| 光斑尺寸 & 解决 | ~0.01 mm spot, 16高清 | ~0.02 mm spot, 8k分辨率 |
| Heat-Affected Zone (热影响区) | Minimal—no burning or charring | Small but deeper cuts possible |
| 理想的材料 | 塑料, 玻璃, 陶瓷, 涂层金属, 木头, 皮革 | 金属 (钢, 铝, 黄铜), thicker plastics |
| 最适合 | 超细, burn-free detail | High-throughput metal engraving & 切割 |
2. ComMarker Omni 1 紫外激光: Zero-Burn Precision
Why Choose UV?
Omni 1 355 nm UV beam delivers cold-light marking, meaning virtually zero heat-affected zone—critical when you’re engraving:
- Clear acrylic without yellowing
- 玻璃 without cracks or spidering
- 皮革 without scorching
加, its 16K高清分辨率 (0.001 毫米精度) reproduces micro-circuit patterns and ultra-small text.
Sample Settings: Frosted Glass Coasters
- 软件: 光烧
- 力量: 25%
- 速度: 300 毫米/秒
- 频率: 40 千赫
- 行距: 0.03 毫米
- 通行证: 2
结果: 锋利的, frosted engravings that stand up to dishwashing.
故障排除技巧
- Faint Marks? Verify auto-focus is within ±0.2 mm of the surface.
- Uneven Frost? Slow speed (200 毫米/秒) and bump power to 30%.
- Lens Fogging? Add a small PC fan for localized airflow.
Ready for burn-free detail? → Buy Omni 1 紫外激光雕刻机
3. 康马克泰坦 1 JPT MOPA纤维激光器: Industrial-Scale Power
Why Titan 1?
Titan 1’s 200 W MOPA fiber laser is built for heavy manufacturing:
- Deep cutting: slice through up to 5 mm of stainless steel
- 3雕刻: multi-layer depth control (3D Slice mode)
- 颜色标记: vivid by tuning pulse width (10–400 ns)
- 极速™: 最多 15,000 mm/s for high throughput
Sample Settings: Stainless Steel Panel Logos
- 软件: EZCAD2
- 激光功率: 100% (200 瓦)
- 速度: 500 毫米/秒
- 频率: 40 千赫
- Q 脉冲宽度: 200 纳秒
- 行距: 0.02 毫米
- 通行证: 1
结果: 深的, permanent logos with high edge sharpness on 4 mm SS304.
故障排除技巧
- Sheet Warping? Use air-assist at 20 PSI to cool edges.
- 深度不一致? Run “Field Correction” in EZCad2 for bed alignment.
- 颜色变化? Adjust pulse width in 10 ns increments for perfect contrast.
Need industrial horsepower? → 商店泰坦 1 JPT MOPA纤维激光器
4. Which Model Matches Your Workflow?
| Shop Type | 推荐模型 | 为什么起作用 |
|---|---|---|
| 定制礼品 & 工艺 | 奥姆尼 1 紫外线 | Burn-free on acrylic, 玻璃, leather—perfect for personalized items. |
| 珠宝 & Medical Tools | 奥姆尼 1 紫外线 / 泰坦 1 | UV for micro-detail; 泰坦 1 for deeper engraving on metals. |
| Heavy Fabrication | 泰坦 1 | Best for thick-metal cutting, 高体积生产. |
| Mixed-Material Shops | Dual-Station (紫外线 + 泰坦 1) | Switch between UV finesse and fiber power seamlessly. |
5. 维护 & 最佳实践
- Optics Care: Clean lenses/mirrors every 50 hours using lens-grade isopropyl alcohol.
- 空中援助: For fiber on metal, 15–20 PSI reduces scorching and clears slag.
- Software Calibration: Quarterly “Field Correction” in EZCad2 or LightBurn ensures grid accuracy.
- Spare Parts Kit: Keep replacement lenses, 镜子, and a backup fiber module—optics degrade faster under heavy use.
6. Take Action
Whether you need zero-burn micro-precision 或者 industrial-strength power, ComMarker has you covered:
Elevate your production, meet tight tolerances, and unlock new revenue streams with the world’s leading UV and fiber laser technologies.