Singurul gravor cu laser care poate grava totul-testul meu hands-on al Commarker Omni 1 UV

If you’ve ever researched laser engravers, you’ve probably come across the same limitations again and again:

• Laser cu diode can’t engrave on glass or clear acrylic.
• Laser cu fibră can’t touch wood.
• CO₂ lasers can’t engrave raw metal.

But what if I told you there’s another type of laser engraver—one that can engrave all of those materials, și altele? I’m talking about UV laser engraving.

Astăzi, I’m sharing my full review and real-world test results using the ComMarker Omni 1, a UV laser engraver that, quite frankly, blew me away. If you’re looking for a versatile machine for your DIY workshop or laser engraving business, this review is for you.

---

Unboxing the ComMarker Omni 1: Setup in Minutes

Let’s start with the basics. Omni 1 UV laser engraver came in three large parts:

1. The base (pre-attached cables)
2. The tower (vertical column)
3. The laser module

Assembly was simple—just 8 screws total. Four to attach the tower to the base, and another four to mount the laser head. După care, plug in the cables and you’re ready to go. No complicated setup, no confusing wiring.

Sincer, if you’ve ever struggled putting together a diode or CO₂ machine, this is refreshingly easy.

Pentru vârf: It ships with two lenses—150mm and 75mm. I did most of my tests with the 150mm lens.

---

What Is a UV Laser Engraver (And Why It’s So Special)?

ComMarker Omni 1 is a Gravoare cu laser UV, operating at 355nm with a 5W power rating. Acum, you might think 5 watts sounds weak—but don’t let that fool you.

Due to its lungime de undă scurtă, the UV beam interacts differently with materials compared to CO₂ or diode lasers. It doesn’t rely on heat to burn or vaporize the surface. In schimb, aceasta breaks molecular bonds, which makes it perfect for high-detail, low-damage engraving.

And the results? They speak for themselves.

---

1 – Engraving on Aluminum Business Cards

Let’s start small—literally. I engraved a portrait and a logo onto black-coated aluminum business cards.

• Rezultat: Razor-sharp lines, no smudging, incredibly small spot size.
• Detail Level: Think photorealistic at the size of a quarter.

This test alone showed me that the Omni 1 could handle the kind of precision normally reserved for machines triple the price.

---

2 – Engraving on Wood

Acum, you might assume UV lasers aren’t ideal for wood—but guess what? It engraved my sample wood blocks beautifully.

Sfat: Settings matter. My first test ran too powerful and scorched the wood. Once I dialed in the frecvență, Q-pulse, and line spacing, the engraving looked amazing.

No soot, no char, just a clean, crisp image of my daughter on birch.

---

3 – Ceramic Coasters

One of my favorite materials to engrave is ceramic, and the Omni 1 nailed this job.

• No masking tape
• No pre-treatment
• Just pure UV power directly onto the surface.

If you’re thinking of adding engraved coasters to your product line—wedding gifts, company swag—this machine can handle it with ease.

---

4 – Stainless Steel and Brass

Here’s where the ComMarker Omni 1 truly shined.

• Oţel inoxidabil: Produced a deep black mark that I’ve never been able to get from my fiber laser.
• Brass Coins: Dark, lizibil, and no distortion, even on small text.

This alone makes it a great Gravor cu laser pentru metal if you want high-contrast marking without a fiber laser.

---

5 – Engraving on Felt & Cutting Cleanly

Omni 1 includes some felt samples, and engraving was perfect—clean, no burn-through on the backside.

But I also tested cutting felt, using a thin cross shape. The cut was sharp, cu zero char or melted edges. Sincer, it looked like I used a scalpel, not a laser.

---

6 – Wax Tin Labels

Normally I use printed labels for my wax tins—but this time I engraved directly onto the metal lid. No smudging, no irregularities. The UV beam handled the curved surface and coating like a champ.

This could be a total game-changer for product packaging.

---

7 – Clear Acrylic and Glass

Here’s the moment you’ve been waiting for.

Acrilic clar? Check.
Sticlă? Absolut.

No marking spray. No coating. Just place the object on the bed and go.

I tested:

• A flat glass panel with my logo
• A reused pickle jar
• A glass ornament (with gold paint fill)

All engraved beautifully. The only challenge was with round objects—without a rotary tool, getting the focus right is tricky. But with a rotary? You’re in business.

Business idea: Engraved ornaments, pahare de vin, favoruri de nunta.

---

8 – Leather Patches

I engraved both brown and gray leather patches. The results were surprisingly consistent:

• No burn smell
• No cleanup needed
• Just clean, defined lines

These are ready to press onto hats or bags—no extra steps required.

---

9 – Cutting 3mm Wood (da, Tăiere!)

Most people say UV lasers are for marking only. But I tried cutting 3mm birch plywood using the inlay pattern “Faith,” and…

It cut beautifully.

There was no charring on the edges, no burning smell, and the final piece popped out easily. For hobbyists or small crafts, this machine can absolutely double as a cutter on thin materials.

---

10 – FOOD ENGRAVING (da, Serios!)

I engraved:

• An apple
• An orange

Rezultatul? No burnt smell. No flavor change. Just clear, surface-level engraving.

While you’re probably not engraving fruit daily, imagine this: engraved cookies or macarons for weddings, zile de nastere, or branded events. That’s a whole new revenue stream.

---

Who Is This Laser Engraver For?

Dacă sunteți în căutarea unui laser engraver that can handle every material, ComMarker Omni 1 UV laser is a solid choice.

• Not just for hobbyists
• Great for small business owners
• Perfect for people unsure what niche to start in

$4,000 might sound high, but considering it replaces the need for multiple machines (diodă, fibră, Co₂), it’s actually a good deal.

You could start engraving:

• Etichete pentru câini
• Ornamente
• Wood signs
• Sticlărie
• Coasters
• Leather patches
• Ambalare
• Business gifts
• Even food

—without needing to buy a second laser.

---

Quick Specs: ComMarker Omni 1 UV

• Tip laser: UV, 355lungime de undă nm
• Putere: 5W
• Obiectiv: 150mm (included), 75mm optional
• Supported Materials: Metal, plastic, sticlă, ceramică, lemn, Piele, acril, alimente, și altele
• Dimensiunea spotului: Extremely fine for high-resolution detail
• Focus System: Dual red dot alignment + motorized focus
• Software de control: LightBurn compatible
• Incinta & Rotativ: Optional accessories available

---

Este Commarker Omni 1 the Best Laser Engraver in 2025?

If versatility is your top priority, this might be the best laser engraver for 2025—especially for beginners who want room to grow or pros looking to expand into new materials.

🔗 Check current pricing and bundles on ComMarker’s official store →