Setări de materiale pe Laserul de fibre MOPA Commarker B6 60W

Getting crisp cuts, vibrant color marks, and deep engravings from your B6 60W MOPA Fiber Laser starts with dialing in the right parameters. From delicate jewelry chains to heavy‑duty welding, the B6’s adjustable pulse widths and high power output let you tackle a huge range of projects. This guide breaks down optimized settings for 13 common materials and applications—complete with pro tips to help you achieve perfect results every time.

---

Why MOPA Matters

A Master Oscillator Power Amplifier (MOPA) fiber laser differs from a standard Q‑switched laser by letting you tweak the pulse duration (Lățimea Q -Pulse) and frequency independently. That means:

• Marcaj de culoare on stainless steel without coatings
• Detaliu fin on reflective metals and plastics
• Gravura adâncă on brass coins and heavy metals
• Minimal Heat‑Affected Zone for delicate substrates

Pair that with 60 W of laser power and you’ve got a workhorse that handles both micro‑precision and industrial tasks.

---

Fiber Laser Engraver Key Parameters Explained

Before diving in, here’s what each setting does:

• Putere (%): Laser output intensity (0–100%).
• Viteză (mm/s): Head travel rate; slower speeds deepen cuts or marks.
• Frecvență (kHz): Rata de repetare a pulsului; higher frequencies smooth edges on metals.
• Lățimea Q -Pulse (ns): Durata pulsului; longer pulses deposit more energy per pulse.
• Line Interval/Space (mm): Raster spacing for engraving; smaller values increase resolution.
• Trece: Number of times the laser repeats the same path for deeper cuts or darker marks.
• Modul Hatch / Mod de imagine: Controls fill patterns (de ex., cross‑hatch, 3D slice, threshold dithering).

---

1. Fiber Laser Engraver Necklace Cutting (Metal Chains)

Mașinărie: ComMarker B6 60W‑MOPA
Software: LightBurn

Setare	Valoare
Putere	95%
Viteză	700 mm/s
Frecvență	35 khz
Lățimea Q -Pulse	1 ns
Interval de linie	0.01 mm
Trece	Continuous

Sfaturi pro

• Clamp Securely: Use fine‑tooth clamps or a rotary jig for round chains.
• Focus on the Link: Red‑dot preview helps you center on the chain link.
• Asistență aeriană: Clears debris and cools the cut zone.

---

2. Fiber Laser Engraver PCB Marking & Curatenie

Mașinărie: ComMarker B6 60W‑MOPA
Software: LightBurn

Pass de marcare

Setare	Valoare
Putere	100%
Viteză	1,000 mm/s
Frecvență	40 khz
Lățimea Q -Pulse	200 ns
Line Space	0.05 mm
Trece	4

Cleaning Pass

Setare	Valoare
Putere	20%
Viteză	1,500 mm/s
Frecvență	100 khz
Lățimea Q -Pulse	200 ns
Line Space	0.01 mm
Trece	2

Sfaturi pro

• Mask Sensitive Areas: Use Kapton tape to protect components.
• High Frequency for Cleaning: 100 kHz lifts oxidation without re‑etching.
• Inspect After Each Pass: Adjust if traces become too faint.

---

3. Gravura Laser Fibră & Cutting for Brass Rings

Mașinărie: ComMarker B6 60W‑MOPA
Software: LightBurn

Setare	Valoare
Putere	100%
Viteză	25 mm/s
Frecvență	30 khz
Lățimea Q -Pulse	400 ns
Trece	30

Sfaturi pro

• Atașament rotativ: Use the R5 for cylindrical rings.
• Test on Scrap: Brass alloys vary—adjust power if you see burrs.
• Coolant or Air: Gentle air assist prevents brass discoloration.

---

4. Fiber Laser Engraving Color Marking on Stainless Steel

Mașinărie: ComMarker B6 60W‑MOPA
Software: LightBurn
Lentila de câmp: 150 mm

Culoare	Viteză	Putere	Interval	Q‑Pulse	Frec
Negru	850	55%	0.03 mm	10 ns	233 khz
roșu	500	15%	0.003 mm	50 ns	300 khz
Galben	750	50%	0.005 mm	10 ns	200 khz
Albastru	950	50%	0.005 mm	10 ns	200 khz
Skin	1,500	30%	0.05 mm	200 ns	20 khz
White	750	30%	0.003 mm	10 ns	250 khz

Sfaturi pro

• Oxide Layer: MOPA’s adjustable pulse width creates colored oxides on stainless.
• Consistent Overlap: Keep line interval consistent for uniform color.
• Test Coupons: Run a color test chart on scrap steel before final parts.

---

5. Fiber Laser Deep Engraving on Brass Coins

Mașinărie: ComMarker B6 60W‑MOPA
Software: EZCAD2

Setare	Valoare
Putere	90%
Viteză	1,000 mm/s
Frecvență	30 khz
Lățimea Q -Pulse	(MOPA Only)
Line Space	0.02 mm
Trece	157

Sfaturi pro

• Răbdare: 157 passes take time—plan for a multi‑hour run.
• Chip Removal: Pause every 50 passes to blow off brass dust.
• Modul Hatch: Use a tight hatch pattern for smooth walls.

---

6. Fiber Laser 3D Relief Engraving on Brass Coins

Mașinărie: ComMarker B6 60W‑MOPA
Software: LightBurn (3D Mod de felie)

Gravare

Setare	Valoare
Putere	90%
Viteză	2,000 mm/s
Frecvență	100 khz
Lățimea Q -Pulse	200 ns
Line Space	0.025 mm
Trece	512
Modul Hatch	45°

Cleanup

Setare	Valoare
Putere	30%
Viteză	6,000 mm/s
Frecvență	75 khz
Lățimea Q -Pulse	200 ns
Line Space	0.10 mm
Trece	1 per 10 trece

Sfaturi pro

• 3D Slice: LightBurn’s 3D slice turns grayscale into depth.
• Long Runs: A 6 hr 50 min job—monitor water chiller temperature.
• Final Polish: Light buffing with micro‑fiber removes residue and enhances shine.

---

7. Fiber Laser Plastic ID Card Engraving

Mașinărie: ComMarker B6 60W‑MOPA
Software: EZCAD2

Setare	Valoare
Putere	40%
Viteză	2,000 mm/s
Trece	1
Line Space	0.03 mm

Sfaturi pro

• PVC Warning: Avoid PVC—use ABS or PETG ID cards.
• Mascare: Apply low‑tack tape to prevent melt marks.
• De mare viteză: 2,000 mm/s avoids warping thin plastic.

---

8. Rust Removal on Coins

Mașinărie: ComMarker B6 60W‑MOPA
Software: EZCAD2

Setare	Valoare
Putere	90%
Viteză	1,000 mm/s
Trece	Varies
Line Space	0.05 mm

Sfaturi pro

• Hatching Mode: Fills rusted areas without over‑etching base metal.
• Incremental Passes: Stop when rust lifts—don’t overshoot into clean metal.
• Brush Off: Use a soft brush to remove flakes between passes.

---

9. Fiber Laser Welding (Battery Tabs & Aluminiu)

Mașinărie: ComMarker B6 60W‑MOPA
Software: EZCAD2

Setare	Valoare
Putere	100%
Viteză	25 mm/s
Frecvență	100 khz
Trece	1

Sfaturi pro

• Shielding Gas: Use argon for aluminum to prevent oxidation.
• Clamping: Secure parts firmly to avoid misalignment.
• Single Pass: High power, low speed for deep weld penetration.

---

10. Fiber Laser Black Marking on Aluminum

Mașinărie: ComMarker B6 60W‑MOPA
Software: EZCAD2

Setare	Valoare
Putere	100%
Viteză	500 mm/s
Frecvență	30 khz
Lățimea Q -Pulse	10 ns
Interval de linie	0.01 mm

Sfaturi pro

• Aluminiu anodizat: Best for crisp black marks.
• Moderate Speed: 500 mm/s balances contrast and throughput.
• No Masking Needed: MOPA forms oxide layer directly.

---

11. Photo Engraving on Black Pendants

Mașinărie: ComMarker B6 60W‑MOPA
Software: EZCAD2

Setare	Valoare
Putere	30%
Viteză	2,000 mm/s
Frecvență	30 khz
Lățimea Q -Pulse	200 ns
Line Space	0.045 mm
Trece	1

Sfaturi pro

• High Resolution: 0.045 mm line space captures fine photo details.
• Grayscale: Convert photos to black‑and‑white with high contrast.
• Single Pass: Minimizes blur on shiny surfaces.

---

12. Fiber Laser Engraving Sci‑Fi Portraits on Name Cards

Mașinărie: ComMarker B6 60W‑MOPA
Software: LightBurn

Setare	Valoare
Putere	50%
Viteză	2,000 mm/s
Frecvență	30 khz
Lățimea Q -Pulse	200 ns
Interval	0.05 mm
Mod de imagine	Prag
Trece	1

Sfaturi pro

• Threshold Dithering: Creates bold, graphic portraits.
• Card Stock: Use heavy paper (300 gsm) for clean cuts.
• Single Pass: Keeps lines sharp.

---

13. Black Marking on Knives

Mașinărie: ComMarker B6 60W‑MOPA
Software: LightBurn

Setare	Valoare
Putere	85%
Viteză	200 mm/s
Frecvență	30 khz
Lățimea Q -Pulse	200 ns
Interval de linie	0.01 mm
Trece	1

Sfaturi pro

• Clamp Blades: Secure knives flat to avoid beam drift.
• Mask Edges: Prevent accidental marking on the cutting edge.
• Siguranță: Wear cut‑resistant gloves when handling blades.

---

Gânduri finale

With this comprehensive settings guide, you’re ready to unlock the full potential of your ComMarker B6 60W MOPA Fiber Laser. Ține minte:

1. Always Test on scrap material before final runs.
2. Fine‑Tune power and speed in small increments.
3. Maintain your optics and cooling system for consistent performance.

Need more help? Reach out to the ComMarker support team for one‑on‑one assistance, depanare, and project tips. Acum trageți lightburn, Încărcați -vă designul preferat, and let the B6 bring your ideas to life!